Cisco 5509 - Catalyst Chassis Switch Handbuch zur Schnellinstallation - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter Cisco 5509 - Catalyst Chassis Switch herunter. Cisco 5509 - Catalyst Chassis Switch 17 Seiten. Wireless controller
Auch für Cisco 5509 - Catalyst Chassis Switch: Installationshandbuch (34 seiten)
Seite drucken
3
Connect the Switch to the Network (continued)
Connect the switch ports to the network
Note: If you are not sure which cable and connector to use for a particular module, refer to
the Catalyst 5000 Series Module Installation Guide.
RJ-45
To connect to modules with RJ-45 interfaces, use
Category 5 UTP (100BaseTX, 10/100BaseTX, CDDI,
Token Ring, ATM), Category 3 UTP (10BaseT), or Type 1
STP (Token Ring) cables with male RJ-45 interfaces.
6
Media-Independent Interface (MII)
Supervisor Engine I and II modules with 100BaseTX
uplinks have MII ports in addition to RJ-45 ports. To
connect to the MII interfaces, use Category 5 UTP
cables with male MII connectors.