Cisco ASR 920 series Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Handbuch für Schalter Cisco ASR 920 series herunter. Cisco ASR 920 series 36 Seiten. Aggregation services router
Auch für Cisco ASR 920 series: Handbuch zur Installation (36 seiten), Erste Schritte (6 seiten), Handbuch zur Installation (42 seiten), Hardware-Installationshandbuch (46 seiten)

Seite drucken

Connecting Console Cables

The following sections describe how to connect to the router using console cables:

Connecting to the USB Serial Port Using Microsoft Windows

This procedure shows how to connect to the USB serial port using Microsoft Windows.

Note

Install the USB device driver before establishing a physical connection between the router and the PC, by

using the USB console cable plugged into the USB serial port. Otherwise, the connection will fail. For more

information, see the

SUMMARY STEPS

1. Connect a USB Type A-to-Type A cable to the USB console port, as shown in the figure below. If you

are using the USB serial port for the first time on a Windows-based PC, install the USB driver now

according to the instructions in the following sections:

2. Connect the USB Type A cable to the PC.

3. To communicate with the router, start a terminal emulator application, such as Microsoft Windows

HyperTerminal. This software should be configured with the following parameters:

DETAILED STEPS

Command or Action

Step 1

Connect a USB Type A-to-Type A cable to the USB console

port, as shown in the figure below. If you are using the USB

serial port for the first time on a Windows-based PC, install

the USB driver now according to the instructions in the

following sections:

Step 2

Connect the USB Type A cable to the PC.

Step 3

To communicate with the router, start a terminal emulator

application, such as Microsoft Windows HyperTerminal.

This software should be configured with the following

parameters:

Installing the Cisco ASR 920 Series Router

Installing the Cisco USB Device

Installing the Cisco ASR 920 Series Router

Driver.

Purpose

• Installing the Cisco Microsoft Windows XP USB

Driver, page 3-29

• Installing the Cisco Microsoft Windows 2000 USB

Driver, page 3-29

• Installing the Cisco Microsoft Windows Vista USB

Driver, page 3-30

Note

You cannot use the USB port and the EIA port

concurrently. When the USB port is used, it takes

priority over the EIA port.

• 9600 baud

• 8 data bits

• no parity

• 1 stop-bit

• no flow control