Cisco ASR 920 series 매뉴얼 - 페이지 26

{카테고리_이름} Cisco ASR 920 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 36 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄
Cisco ASR 920 series 매뉴얼
Connecting Console Cables
Connecting Console Cables
The following sections describe how to connect to the router using console cables:
Connecting to the USB Serial Port Using Microsoft Windows
This procedure shows how to connect to the USB serial port using Microsoft Windows.
Note
Install the USB device driver before establishing a physical connection between the router and the PC, by
using the USB console cable plugged into the USB serial port. Otherwise, the connection will fail. For more
information, see the
SUMMARY STEPS
1. Connect a USB Type A-to-Type A cable to the USB console port, as shown in the figure below. If you
are using the USB serial port for the first time on a Windows-based PC, install the USB driver now
according to the instructions in the following sections:
2. Connect the USB Type A cable to the PC.
3. To communicate with the router, start a terminal emulator application, such as Microsoft Windows
HyperTerminal. This software should be configured with the following parameters:
DETAILED STEPS
Command or Action
Step 1
Connect a USB Type A-to-Type A cable to the USB console
port, as shown in the figure below. If you are using the USB
serial port for the first time on a Windows-based PC, install
the USB driver now according to the instructions in the
following sections:
Step 2
Connect the USB Type A cable to the PC.
Step 3
To communicate with the router, start a terminal emulator
application, such as Microsoft Windows HyperTerminal.
This software should be configured with the following
parameters:
Installing the Cisco ASR 920 Series Router
26
Installing the Cisco USB Device
Installing the Cisco ASR 920 Series Router
Driver.
Purpose
• Installing the Cisco Microsoft Windows XP USB
Driver, page 3-29
• Installing the Cisco Microsoft Windows 2000 USB
Driver, page 3-29
• Installing the Cisco Microsoft Windows Vista USB
Driver, page 3-30
Note
You cannot use the USB port and the EIA port
concurrently. When the USB port is used, it takes
priority over the EIA port.
• 9600 baud
• 8 data bits
• no parity
• 1 stop-bit
• no flow control