Cisco ASR 920 series 매뉴얼 - 페이지 25

{카테고리_이름} Cisco ASR 920 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 36 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄
Cisco ASR 920 series 매뉴얼
Installing the Cisco ASR 920 Series Router
3. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.
4. If you are also connecting a redundant DC power supply, repeat these steps for the second power source.
DETAILED STEPS
Step 1
Remove the tape from the circuit-breaker device handle, and restore power by moving the circuit-breaker device handle
to the On (|) position.
Step 2
Verify the power supply operation by ascertaining that the front panel LED is green.
Step 3
If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.
Step 4
If you are also connecting a redundant DC power supply, repeat these steps for the second power source.
Note
When you connect a redundant DC power supply, ensure that each power supply is connected to a separate
power source to prevent power loss during a failure.
Activate AC Power Supply
SUMMARY STEPS
1. Plug the power cord into the power supply.
2. Connect the other end of the power cord to an AC-input power source.
3. Verify the power supply operation by ascertaining that the front panel LED is green.
4. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.
5. If you are also connecting a redundant AC power supply, repeat these steps for the second power source.
DETAILED STEPS
Step 1
Plug the power cord into the power supply.
Step 2
Connect the other end of the power cord to an AC-input power source.
Step 3
Verify the power supply operation by ascertaining that the front panel LED is green.
Step 4
If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.
Step 5
If you are also connecting a redundant AC power supply, repeat these steps for the second power source.
Note
When you connect a redundant AC power supply, ensure that each power supply is connected to a separate
power source to prevent power loss during failure.

Connect Chassis to Network

Note
Connect only SELV services to all the device ports.
Activate AC Power Supply
Installing the Cisco ASR 920 Series Router
25