Cisco ASR 920 series Manual - Página 25

Navegue en línea o descargue pdf Manual para Interruptor Cisco ASR 920 series. Cisco ASR 920 series 36 páginas. Aggregation services router
También para Cisco ASR 920 series: Manual de instalación (36 páginas), Primeros pasos (6 páginas), Manual de instalación (42 páginas), Manual de instalación del hardware (46 páginas)

Installing the Cisco ASR 920 Series Router

3. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

4. If you are also connecting a redundant DC power supply, repeat these steps for the second power source.

DETAILED STEPS

Step 1

Remove the tape from the circuit-breaker device handle, and restore power by moving the circuit-breaker device handle

to the On (|) position.

Step 2

Verify the power supply operation by ascertaining that the front panel LED is green.

Step 3

If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

Step 4

If you are also connecting a redundant DC power supply, repeat these steps for the second power source.

Note

When you connect a redundant DC power supply, ensure that each power supply is connected to a separate

power source to prevent power loss during a failure.

Activate AC Power Supply

SUMMARY STEPS

1. Plug the power cord into the power supply.

2. Connect the other end of the power cord to an AC-input power source.

3. Verify the power supply operation by ascertaining that the front panel LED is green.

4. If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

5. If you are also connecting a redundant AC power supply, repeat these steps for the second power source.

DETAILED STEPS

Step 1

Plug the power cord into the power supply.

Step 2

Connect the other end of the power cord to an AC-input power source.

Step 3

Verify the power supply operation by ascertaining that the front panel LED is green.

Step 4

If the LEDs indicate a power problem, see the Troubleshooting Aids chapter.

Step 5

If you are also connecting a redundant AC power supply, repeat these steps for the second power source.

Note

When you connect a redundant AC power supply, ensure that each power supply is connected to a separate

power source to prevent power loss during failure.

Connect Chassis to Network

Note

Connect only SELV services to all the device ports.

Activate AC Power Supply

Installing the Cisco ASR 920 Series Router