Accustic Arts CD-PLAYER I (MK 3) Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für CD-Spieler Accustic Arts CD-PLAYER I (MK 3) herunter. Accustic Arts CD-PLAYER I (MK 3) 10 Seiten.
Auch für Accustic Arts CD-PLAYER I (MK 3): Gebrauchsanweisung (14 seiten)

Seite drucken

separate subwoofer. Subwoofers often have only unbalanced high level inputs. The >OUT 3< can also

be used as subwoofer connection if you don't operate in „Bi-Amping" mode, and only use one

balanced line output, e.g. >OUT 1<.

If you don't own a power amplifier with balanced inputs, you can of course also connect a power

amplifier equipped with unbalanced inputs. Therefore please use the unbalanced line output >OUT 3<.

Using the rotary control 13 >VOLUME< you can set the volume of the reproduction device connected

to the PREAMP I – MK 3

The volume can also be changed using the separate remote control ACCUSTIC ARTS

Fig. 3: Volume setting on the rotary potentiometer VOLUME

Fig. 4: ACCUSTIC ARTS

5.5 Use of the mute function >MUTE<

This push-button is configured for short interrupts. By pushing this button all three line outputs >OUT

1< to >OUT 3< are turned off. This means that no music signal is being transmitted to the connected

power amplifier.

If you don't operate the unit for a longer period, e.g. several hours or days, then the unit must be

switched off by pushing the mains switch 2 on the rear site of the unit.

Minimum

remote control – RC II

 reducing volume

 increasing volume

Maximum

type RC - II.