Accustic Arts CD-PLAYER I (MK 3) Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für CD-Spieler Accustic Arts CD-PLAYER I (MK 3) herunter. Accustic Arts CD-PLAYER I (MK 3) 10 Seiten.
Auch für Accustic Arts CD-PLAYER I (MK 3): Gebrauchsanweisung (14 seiten)

Seite drucken

5.6 Connection to mains power

Only connect the unit to the mains power when all the other cable connections have already been

carried out.

Plug in the mains cable firstly in the inlet connector sockets of the unit and only then the earthing pin-

plug in the mains socket.

By actuating switch 2 you can switch your unit on or off.

5.7 Replacing damaged mains fuses

If a fuse is damaged only replace the fuse with original types having the same ampere value, the

same voltage endurance and the same time-lag. Never use fuses with other ampere classes or time-

lag classes.

IMPORTANT!

Pull out the mains plug!

Always disconnect the unit from the mains power before replacing a fuse.

To change the fuse please use a screwdriver suitable for the slot in the fuse holder 1. Press the

screwdriver lightly into the slot and gently lever the fuse holder (plastic cap) carefully out of the

respective socket. Now you can take out the fuse holder and replace the fuse.

For countries with 220-240 V / 50-60 Hz

please use the following fuse types:

400 mA – slow blow

Notice:

Use the included fuse for replacement!

6 Looking after your equipment

The PREAMP I – MK 3 from ACCUSTIC ARTS

usual care taken with high quality devices. Clean the housing with a dry or slightly moistened cloth.

Please do not use any aggressive detergents or detergents which contain silicon.

The best way to clean the chromed inlay and knops is with a mild non-aggressive fat-dissolving

detergent (e.g. glass cleaner). Use a very soft clean cloth and wipe the front plate with this without

exerting strong pressure. Never use abrasive agents or polishing agents with abrasive particles.

IMPORTANT!

Do not place the unit in direct sunshine and avoid extreme changes in

temperature.

For countries with 100-120 V / 50-60 Hz

please use the following fuse types:

800 mA – slow blow

does not require special treatment in excess of the