DigiSender DGXDSDV112 Installationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationshandbuch für Extender DigiSender DGXDSDV112 herunter. DigiSender DGXDSDV112 16 Seiten. Single input xd hdmi av sender system
Seite druckenDGXDSDV112 - DigiSender® XD HDMI - Single Input HDMI AV Sender System
continued...
Note: When switching from Test Mode to Normal mode, or vice versa, it will be necessary to turn the
unit off and then back on again.
9.
The second number indicates Frame Loss. This
is the percentage of Frames that are not getting
through to the DigiSender® Receiver correctly. If you
are getting high Frame Loss you may need to adjust
the positioning of the units and/or aerials.
11.
The last icon indicates Signal Level. This is key to a
good Frame Rate and low Frame Loss. Endeavour to
keep this as high as possible. If you are getting a low
Signal Level, you may need to adjust the positioning
of the units and/or aerials.
Page 10
10.
'P' means that the picture quality should be good,
with the Frame Rate remaining steady at around
25. 'F' means that you may notice subtle losses in
picture quality due to Frame Loss. Try adjusting the
positioning of the units and/or aerials.
12.
Having made any necessary adjustments to the po-
sitioning of the units and/or aerials, flick the Mode
Switch from Test to Normal and turn the unit off.
Installation is now complete!
Please read the instructions carefully prior to installation