- ページ 10

エクステンダー DigiSender DGXDSDV112のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DigiSender DGXDSDV112 16 ページ。 Single input xd hdmi av sender system

DGXDSDV112 - DigiSender® XD HDMI - Single Input HDMI AV Sender System

continued...

Note: When switching from Test Mode to Normal mode, or vice versa, it will be necessary to turn the

unit off and then back on again.

The second number indicates Frame Loss. This

is the percentage of Frames that are not getting

through to the DigiSender® Receiver correctly. If you

are getting high Frame Loss you may need to adjust

the positioning of the units and/or aerials.

11.

The last icon indicates Signal Level. This is key to a

good Frame Rate and low Frame Loss. Endeavour to

keep this as high as possible. If you are getting a low

Signal Level, you may need to adjust the positioning

of the units and/or aerials.

Page 10

10.

'P' means that the picture quality should be good,

with the Frame Rate remaining steady at around

25. 'F' means that you may notice subtle losses in

picture quality due to Frame Loss. Try adjusting the

positioning of the units and/or aerials.

12.

Having made any necessary adjustments to the po-

sitioning of the units and/or aerials, flick the Mode

Switch from Test to Normal and turn the unit off.

Installation is now complete!

Please read the instructions carefully prior to installation