- ページ 9
エクステンダー DigiSender DGXDSDV112のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DigiSender DGXDSDV112 16 ページ。 Single input xd hdmi av sender system
ページを印刷するcontinued...
5.
The DigiSender® XD HDMI Boot Screen will be dis-
played whilst the DigiSender® Transmitter and Re-
ceiver synchronise.
7.
You will notice that at the top right corner of the
screen is a blue Test Bar with some information on
it. If the Test Bar is not present, then the DigiSender®
Receiver may not be in Test Mode. Turn the Di-
giSender® Receiver off, flick the Mode Switch on the
back from Normal to Test and then turn the Receiver
on again.
Please read the instructions carefully prior to installation
DGXDSDV112 - DigiSender® XD HDMI - Single Input HDMI AV Sender System
6.
After approximately 5 seconds the picture will
change to whatever you are transmitting. If the pic-
ture does not change, or changes to a Test Card, you
may need to re-sync the DigiSender® Transmitter and
Receiver. See page 12 for more details.
8.
The first number indicates the Frame Rate that the
DigiSender® Receiver is picking up from the Trans-
mitter and outputting to your TV.
Page 09