Sharp Carousel R-930CS Service-Handbuch - Seite 39

Blättern Sie online oder laden Sie pdf Service-Handbuch für Mikrowellenherd Sharp Carousel R-930CS herunter. Sharp Carousel R-930CS 49 Seiten. Convection microwave oven
Auch für Sharp Carousel R-930CS: Betriebshandbuch (32 seiten), Broschüre & Specs (8 seiten), Broschüre & Specs (5 seiten)

Seite drucken

Remove door assembly, refer to "Door Replacement".

Replacement of door components are as follows:

CHOKE COVER

1. Place door assembly on a soft cloth with latches facing

up.

Note: As the engaging part of choke cover and door panel

are provided at several places, do not force any particular

part.

2. Insert an putty knife (thickness of about 0.5mm) into the

gap between the choke cover and corner portion of door

panel as shown Figure C-6 to free engaging parts.

3. Lift up choke cover.

4. Now choke cover is free from door panel.

2 LIFT UP

PUTTY KNIFE

1 BENT

CHOKE COVER

Figure C-6. Door Disassembly

DOOR DISASSEMBLY

DOOR PANEL

5. Remove the twelve (12) screws holding the door panel

NOTE: The one (1) screw of the twelve (12) screws also

6. Remove the door panel from the door frame. Now the

DOOR GLASS

7. Remove the two (2) screws holding the thermal plate U

8. Remove the two (2) screws holding the thermal plate R

9. Remove the thermal plate U and the thermal plate R from

10.Slide the door glass leftward.

11.Slide the door glass upward.

12.Remove the door glass from the door frame. Now the

Bent

Door

INSIDE

Choke

Panel

cover

DOOR DECORATION AND DOOR FRAME

13.Straighten all tabs of the door decoration.

Upper

Lower

14.Remove the door decoration from the door frame.

FRONT

15.Now the door decoration and door frame are free.

to the door frame.

holds the earth terminal of the door decoration to the

door frame.

door panel is free.

to the door frame.

the door frame.

door glass is free.

R-930CS