Sharp Carousel R-930CS Instrukcja serwisowa - Strona 39
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Kuchenka mikrofalowa Sharp Carousel R-930CS. Sharp Carousel R-930CS 49 stron. Convection microwave oven
Również dla Sharp Carousel R-930CS: Instrukcja obsługi (32 strony), Broszura i specyfikacje (8 strony), Broszura i specyfikacje (5 strony)
Drukuj stronę
Remove door assembly, refer to "Door Replacement".
Replacement of door components are as follows:
CHOKE COVER
1. Place door assembly on a soft cloth with latches facing
up.
Note: As the engaging part of choke cover and door panel
are provided at several places, do not force any particular
part.
2. Insert an putty knife (thickness of about 0.5mm) into the
gap between the choke cover and corner portion of door
panel as shown Figure C-6 to free engaging parts.
3. Lift up choke cover.
4. Now choke cover is free from door panel.
2 LIFT UP
PUTTY KNIFE
1 BENT
CHOKE COVER
Figure C-6. Door Disassembly
DOOR DISASSEMBLY
DOOR PANEL
5. Remove the twelve (12) screws holding the door panel
NOTE: The one (1) screw of the twelve (12) screws also
6. Remove the door panel from the door frame. Now the
DOOR GLASS
7. Remove the two (2) screws holding the thermal plate U
8. Remove the two (2) screws holding the thermal plate R
9. Remove the thermal plate U and the thermal plate R from
10.Slide the door glass leftward.
11.Slide the door glass upward.
12.Remove the door glass from the door frame. Now the
Bent
Door
INSIDE
Choke
Panel
cover
DOOR DECORATION AND DOOR FRAME
13.Straighten all tabs of the door decoration.
Upper
Lower
14.Remove the door decoration from the door frame.
FRONT
15.Now the door decoration and door frame are free.
37
to the door frame.
holds the earth terminal of the door decoration to the
door frame.
door panel is free.
to the door frame.
to the door frame.
the door frame.
door glass is free.
R-930CS