Sharp Aquos LC-26GD7E Betriebshandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-26GD7E herunter. Sharp Aquos LC-26GD7E 42 Seiten. Lcd colour television
Seite drucken
Daily operation
Switch on/off
Your TV is equipped with an eco-standby power supply unit. On standby
the power consumption drops to low power (see page 36). Weak electric
power is still consumed even if the the unit is switched off by the ON/
OFF switch.
Attention: If you want to switch the TV set completely off you have to
remove the plug of the mains power cable from the mains power socket.
However bear in mind that in both cases EPG data will be lost and pro-
grammed timer recordings will not be performed by the TV.
Switching off
If the TV set is switched on (Mode indicator lights
green), you can switch it to standby using the red ON/
OFF button of the remote control.
The mode indicator on the TV set lights red. If the mode
indicator lights orange, a timed recording is made, EPG
data is entered or radio operation without screen display
is active.
Switching on the TV set
From standby it is best to switch back on with the red
ON/OFF button or with the numeric buttons (0 – 9) of
the remote control.
Or switch on the TV set with OK, you can see the station
table and select a station.
Switching the Radio function on *
RADIO
Radio mode is only possible if the TV set is equipped for
DVB-T/S reception or an external radio receiver is con-
nected to the AV connections EXT 1, EXT2 .
If you switch off the TV set with the
on the top of the set to standby, the mode indicator on
the TV set is no longer lit.
The unit then cannot be switched on by the remote
control.
Changing stations
with the P∧ / P∨ buttons on the remote control
with the numeric buttons of the remote control
The TV set has a dynamic memory. If up to 9 stations are stored, you
only need to enter one digit, up to 99 two digits, up to 999 three digits
and above 999 four digits (please look in the station table to see how
many stations have been stored).
ON/OFF button
Station up/down
1 digit stations
Press buttons 0 – 9 for one second, and the station
changes instantly.
Or press button 0 – 9 briefl y, the station then changes
after 2 seconds (the station changes immediately when
only 9 stations are stored).
2 digit stations
After briefl y pressing the fi rst numeric button keep the
second numeric button pressed for one second, the sta-
tion then changes immediately.
Or press both numeric buttons briefl y, the station then
changes after 2 seconds (the station changes immedi-
ately when only 99 stations are stored).
3 digit stations
After briefl y pressing the fi rst and second numeric button
keep the third numeric button pressed for one second,
the station then changes immediately.
Or press the three numeric buttons briefl y, the station
then changes after 2 seconds (the station changes im-
mediately when only 999 stations are stored).
4 digit stations
Press the four numeric buttons briefl y, the station then
changes immediately..
15