Sharp Aquos LC-26GD7E Betriebshandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-26GD7E herunter. Sharp Aquos LC-26GD7E 42 Seiten. Lcd colour television

Seite drucken

Operating additional equipment

Sound from PC or Set Top Box

Feed the analogue audio signal from the PC or the STB to the sockets

AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced by

the TV speakers.

If you have connected a digital external audio ampliﬁ er, you can select

the digital audio signal in the connection wizard ("TV menu – Connec-

tions – AV setup") and assign it to the PC IN socket. You do the other

settings for the audio ampliﬁ er as described for the digital ampliﬁ er

on page 33. The digital audio signal of the Set Top Box is fed in at the

"AUDIO DIGITAL IN" socket on the TV. The digital audio signal from the

TV "AUDIO DIGITAL OUT" is fed to the ampliﬁ er.

Component Video connection

If you have a DVD player/recorder with Component OUT connections,

you can connect it to the EXT 3 sockets of the TV instead of to the Euro

AV sockets. The connecting cable with three cinch plugs each transmits

picture information. The playback is better quality than via the Euro AV

socket.

You need another cinch cable for the analogue audio transmission. Con-

nect the analogue audio outputs of the DVD player to the "AUDIO IN L/R"

sockets on the TV set. The sound is reproduced by the TV speakers.

nections – AV setup"):

Assign the AUDIO DIG. IN input here, if a digital audio ampliﬁ er is also

connected, to the "EXT 3" socket. You do the other settings for the audio

ampliﬁ er as described for the digital ampliﬁ er on page 33.

Make a connection between "AUDIO DIG OUT" of the DVD player and

"AUDIO DIGITAL IN" of the TV set.

Set the signal at the Component input in the connection wizard:

Select the component input in the AV selection.

Call AV selection.

External sources

VIDEO

EXT1

EXT2

EXT3

EXT4

EXT5

PC IN

Select EXT 3 with

and call up with OK.

Start playback on the connected device.

Set geometry

Call the TV menu with the MENU button, select "Geometry" with

and set:

If the picture is not positioned correctly you can move the picture hori-

zontally and vertically here so that it ﬁ lls the whole screen. You can also

set the phase position so that the picture appears in the best possible

quality.