Sharp CD-BA120 Betriebshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp CD-BA120 herunter. Sharp CD-BA120 18 Seiten. Sharp operation manual mini component system cd-ba120
Auch für Sharp CD-BA120: Kurzanleitung (2 seiten)

Seite drucken

HEADPHONES

RESETTING THE MICROCOMPUTER

POWER

ON/

STAND-BY

TRANSPORTING THE UNIT

POWER

ON/

STAND-BY

Reset the microcomputer under the following conditions:

EQUALIZER

X-BASS/

DEMO

Caution:

Before you move this product to a new location, proceed

OPEN/

as follows:

Before plugging in or unplugging the headphones, make sure

the volume level is reduced.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug

and are between 16 ohms and 50 ohms impedance. The

recommended impedance is 32 ohms.

When headphones are connected, the speakers are discon-

nected automatically. Adjust the VOLUME control for the

desired volume.

To erase all of the stored memory contents (clock and timer

settings, and tuner and CD presets).

If the display is not correct.

If the operation is not correct.

Press the ON/STAND-BY button to enter the stand-by mode.

While pressing down the

0 / R

BASS/DEMO button, hold down the ON/STAND-BY button for

at least 1 second.

"CLEAR AL" will appear.

The operation explained above will erase all data stored in

memory including clock and timer settings, and tuner and CD

presets.

Press the ON/STAND-BY button to turn the power on.

Press the CD button.

Press the OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted in the unit.

Press the OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the stand-by mode,

and then unplug the AC power cord from the AC outlet.

button and the EQUALIZER/X-