Sharp CD-BA120 운영 매뉴얼 - 페이지 16

{카테고리_이름} Sharp CD-BA120에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA120 18 페이지. Sharp operation manual mini component system cd-ba120
Sharp CD-BA120에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)

페이지 인쇄

HEADPHONES

RESETTING THE MICROCOMPUTER

POWER

ON/

STAND-BY

TRANSPORTING THE UNIT

POWER

ON/

STAND-BY

Reset the microcomputer under the following conditions:

EQUALIZER

X-BASS/

DEMO

Caution:

Before you move this product to a new location, proceed

OPEN/

as follows:

Before plugging in or unplugging the headphones, make sure

the volume level is reduced.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug

and are between 16 ohms and 50 ohms impedance. The

recommended impedance is 32 ohms.

When headphones are connected, the speakers are discon-

nected automatically. Adjust the VOLUME control for the

desired volume.

To erase all of the stored memory contents (clock and timer

settings, and tuner and CD presets).

If the display is not correct.

If the operation is not correct.

Press the ON/STAND-BY button to enter the stand-by mode.

While pressing down the

0 / R

BASS/DEMO button, hold down the ON/STAND-BY button for

at least 1 second.

"CLEAR AL" will appear.

The operation explained above will erase all data stored in

memory including clock and timer settings, and tuner and CD

presets.

Press the ON/STAND-BY button to turn the power on.

Press the CD button.

Press the OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted in the unit.

Press the OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the stand-by mode,

and then unplug the AC power cord from the AC outlet.

button and the EQUALIZER/X-