Sharp AR-M208 Handbuch für den Schlüsselbetrieb - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für den Schlüsselbetrieb für Alles in einem Drucker Sharp AR-M208 herunter. Sharp AR-M208 24 Seiten. Digital laser copier/ printer
Auch für Sharp AR-M208: Service-Handbuch (32 seiten)

Seite drucken

Output Trays

If a job separator tray kit or a finisher is installed along with a facsimile expansion kit, this program can
be used to specify which output tray will be used to receive copies and which will be used to receive
prints.
When "OUTPUT TRAYS" is selected and the OK key is pressed, the following display will appear.
(Example: The following display is shown for a copier equipped with a facsimile expansion kit, and a job
separator tray kit.)
1.
Use the
2.
Press the OK key.

Offset Function

If the offset function is enabled, each set of copies will be stacked offset from the previous set in the
sort and group modes in the center tray of the copier or in the offset tray of a finisher. This program is
used to enable or disable the offset function for these trays respectively.
When "OFFSET FUNCTION" is selected and the OK key is pressed, the following display will appear.
1.
Use the
center tray of the copier.
2.
If a finisher is installed, use the
use the
tray of the finisher.
3.
Press the OK key.
OUTPUT TRAYS
FAX
COPY
PRINT
PATTERN
and
keys to select the desired pattern of output trays.
OFFSET FUNCTION
CENTER TRAY
OFFSET TRAY
OFFSET
or
key to enable or disable the offset function for the
or
key to enable or disable the offset function for the offset
KEY OPERATOR PROGRAMS
1
ON
key to select "OFFSET TRAY" and
11