Sharp AR-M208 Panduan Operator Kunci - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Operator Kunci untuk Semua dalam Satu Printer Sharp AR-M208. Sharp AR-M208 24 halaman. Digital laser copier/ printer
Juga untuk Sharp AR-M208: Panduan Servis (32 halaman)

Halaman Cetak

Output Trays

If a job separator tray kit or a finisher is installed along with a facsimile expansion kit, this program can

be used to specify which output tray will be used to receive copies and which will be used to receive

prints.

When "OUTPUT TRAYS" is selected and the OK key is pressed, the following display will appear.

(Example: The following display is shown for a copier equipped with a facsimile expansion kit, and a job

separator tray kit.)

Use the

Press the OK key.

Offset Function

If the offset function is enabled, each set of copies will be stacked offset from the previous set in the

sort and group modes in the center tray of the copier or in the offset tray of a finisher. This program is

used to enable or disable the offset function for these trays respectively.

When "OFFSET FUNCTION" is selected and the OK key is pressed, the following display will appear.

Use the

center tray of the copier.

If a finisher is installed, use the

use the

tray of the finisher.

Press the OK key.

OUTPUT TRAYS

FAX

COPY

PATTERN

and

keys to select the desired pattern of output trays.

OFFSET FUNCTION

CENTER TRAY

OFFSET TRAY

OFFSET

key to enable or disable the offset function for the

key to enable or disable the offset function for the offset

KEY OPERATOR PROGRAMS

key to select "OFFSET TRAY" and