Sharp Gemini II Plus MX-2614N Technisches Handbuch - Seite 25
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Alles in einem Drucker Sharp Gemini II Plus MX-2614N herunter. Sharp Gemini II Plus MX-2614N 42 Seiten.
Seite drucken
In the event of a power failure during a firmware update or HDD failure, the machine may fail to reboot because of
corrupted firmware. In this case the SD card containing the correct BOOT program will have to be replaced,
firmware will then have to be recovered using the CN method.
Firmware Recovery Procedure:
To enter the CN firmware recovery method, turn ON the UPDATE DIP-SW on the MFP PWB
The following five keys are used for executing functions when in the CN Update mode
UP key
1. Insert the USB memory containing the firmware into the USB port
2. Turn on the power
3. Check to confirm the machine starts booting (It takes more than
10 seconds to display the menu)
Firmware Recovery Procedure
DOWN key
MENU key
BACK key
OK key
Display when Booting is complete
25
Document Solutions After Sales Service