Sharp Gemini II Plus MX-2614N Technische handleiding - Pagina 25

Blader online of download pdf Technische handleiding voor {categorie_naam} Sharp Gemini II Plus MX-2614N. Sharp Gemini II Plus MX-2614N 42 pagina's.

In the event of a power failure during a firmware update or HDD failure, the machine may fail to reboot because of

corrupted firmware. In this case the SD card containing the correct BOOT program will have to be replaced,

firmware will then have to be recovered using the CN method.

Firmware Recovery Procedure:

To enter the CN firmware recovery method, turn ON the UPDATE DIP-SW on the MFP PWB

The following five keys are used for executing functions when in the CN Update mode

UP key

1. Insert the USB memory containing the firmware into the USB port

2. Turn on the power

3. Check to confirm the machine starts booting (It takes more than

10 seconds to display the menu)

Firmware Recovery Procedure

DOWN key

MENU key

BACK key

OK key

Display when Booting is complete

Document Solutions After Sales Service