Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Betriebshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Projektor Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector herunter. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 Seiten. Colour inkjet printer
Auch für Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector: Betriebshandbuch (49 seiten), Betriebshandbuch (49 seiten), Grundlegende Informationen und Vorbereitungen (10 seiten)

Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Betriebshandbuch

CONNECTING THE POWER CORD

Insert the power cord into the socket on the rear of the printer.
1
Connect the other end of the power cord to an outlet.
2
Power for the printer is turned on automatically.
Do not connect the printer to other than 100V-240V outlet. Plugging the printer into
an incompatible power supply may cause irreparable damage.
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.

INDICATOR LIGHTS

When only the green power lamp is lit, the printer is working properly.
When a printer error occurs, a light will indicate what problem has occurred, as explained
below.
......lit
......blinking
Light condition
Paper
Ink
Power
For more details on solving a problem, refer to the Troubleshooting section in the Online Manual.
......fast blinking
Problem and Solution
Paper tray is empty, or a paper jam has occurred.
Load more paper or remove the jammed paper and press the paper button.
No ink, or a print head is not installed.
Change the ink tank, or install a print head.
Front cover is open.
Close the front cover.
The printer is warming up, or receiving data. Please wait.
The carriage is not operating normally, or some errors may have
occurred inside the printer.
......extinguished (lamp is off)
11