Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 운영 매뉴얼 - 페이지 13
{카테고리_이름} Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 페이지. Colour inkjet printer
Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대해서도 마찬가지입니다: 운영 매뉴얼 (49 페이지), 운영 매뉴얼 (49 페이지), 기본 정보 및 준비 사항 (10 페이지)
페이지 인쇄
CONNECTING THE POWER CORD
Insert the power cord into the socket on the rear of the printer.
1
Connect the other end of the power cord to an outlet.
2
Power for the printer is turned on automatically.
Do not connect the printer to other than 100V-240V outlet. Plugging the printer into
an incompatible power supply may cause irreparable damage.
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.
INDICATOR LIGHTS
When only the green power lamp is lit, the printer is working properly.
When a printer error occurs, a light will indicate what problem has occurred, as explained
below.
......lit
......blinking
Light condition
Paper
Ink
Power
For more details on solving a problem, refer to the Troubleshooting section in the Online Manual.
......fast blinking
Problem and Solution
Paper tray is empty, or a paper jam has occurred.
Load more paper or remove the jammed paper and press the paper button.
No ink, or a print head is not installed.
Change the ink tank, or install a print head.
Front cover is open.
Close the front cover.
The printer is warming up, or receiving data. Please wait.
The carriage is not operating normally, or some errors may have
occurred inside the printer.
......extinguished (lamp is off)
11