Sharp XG-V10XM Handbuch zur Netzwerkkonfiguration - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch zur Netzwerkkonfiguration für Projektor Sharp XG-V10XM herunter. Sharp XG-V10XM 19 Seiten. How to connect to a network
Auch für Sharp XG-V10XM: Kurzreferenz-Handbuch (2 seiten)
Seite drucken
When installing the expansion cards you must do the following:
1.) Shut projector Off.
2.) Remove the three screws from expansion plate cover. (Refer to Figure A)
3.) Remove (4) four screws that secure the RF shield (Refer to Figure B)
NOTE: Number 2 - Only needs to be done if expansion slot is used for first time.
4.) Remove the cover plate from the optional expansion board that will be installed into the slot.
5.) Insert the expansion board into the connector (Refer to Figure C)
6.) Secure the expansion cover to the board.
Expansion Board Installation
Expansion Slot Closed (with cover)
FIG. A
Screws that secure Expansion Plate cover (Fig A).
3
10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk