Sharp XG-V10XM Manuale di configurazione della rete - Pagina 3
Sfoglia online o scarica il pdf Manuale di configurazione della rete per Proiettore Sharp XG-V10XM. Sharp XG-V10XM 19. How to connect to a network
Anche per Sharp XG-V10XM: Manuale di riferimento rapido (2 pagine)
Stampa la pagina
When installing the expansion cards you must do the following:
1.) Shut projector Off.
2.) Remove the three screws from expansion plate cover. (Refer to Figure A)
3.) Remove (4) four screws that secure the RF shield (Refer to Figure B)
NOTE: Number 2 - Only needs to be done if expansion slot is used for first time.
4.) Remove the cover plate from the optional expansion board that will be installed into the slot.
5.) Insert the expansion board into the connector (Refer to Figure C)
6.) Secure the expansion cover to the board.
Expansion Board Installation
Expansion Slot Closed (with cover)
FIG. A
Screws that secure Expansion Plate cover (Fig A).
3
10/16/2001
L:\tekcentr\CACTrain\SPS_ntwk