Shimano BR-M6000 Handbuch für Händler - Seite 37
Blättern Sie online oder laden Sie pdf Handbuch für Händler für Zubehör für Fahrräder Shimano BR-M6000 herunter. Shimano BR-M6000 39 Seiten. Hydraulic disc brake
Auch für Shimano BR-M6000: Handbuch für Händler (39 seiten)
Seite drucken
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake pads
3
(A)
(C)
4
For split pin types
4
To be continued on next page
Use a flat-shaped tool to push the
pistons straight back in as far as they will
go, while being careful not to twist the
pistons.
(A)
Install the new brake pads, the bolt, and
the pad spacer (red).
At this point, make sure to install the
snap ring as well.
(B)
(D)
Install the new brake pads the split pin,
and then install the pad spacers (red).
(A)
After this, bend open the split pin.
(B)
(C)
37
(A)
Piston
NOTE
Do not push the pistons with a sharp tool.
The pistons may be damaged.
(A)
Brake pad
(B)
Snap ring
(C)
Bolt
(D)
Pad spacer (red)
Tightening torque
2 - 4 N·m
TECH TIPS
Install the pad fixing spring as shown in the
illustration. (There are left (L) and right (R)
marks on the spring.)
Pad fixing spring
(A)
Brake pad
(B)
Split pin
(C)
Pad spacer (red)