Shimano BR-M6000 Panduan Dealer - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano BR-M6000. Shimano BR-M6000 39 halaman. Hydraulic disc brake
Juga untuk Shimano BR-M6000: Panduan Dealer (39 halaman)
Halaman Cetak
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake pads
3
(A)
(C)
4
For split pin types
4
To be continued on next page
Use a flat-shaped tool to push the
pistons straight back in as far as they will
go, while being careful not to twist the
pistons.
(A)
Install the new brake pads, the bolt, and
the pad spacer (red).
At this point, make sure to install the
snap ring as well.
(B)
(D)
Install the new brake pads the split pin,
and then install the pad spacers (red).
(A)
After this, bend open the split pin.
(B)
(C)
37
(A)
Piston
NOTE
Do not push the pistons with a sharp tool.
The pistons may be damaged.
(A)
Brake pad
(B)
Snap ring
(C)
Bolt
(D)
Pad spacer (red)
Tightening torque
2 - 4 N·m
TECH TIPS
Install the pad fixing spring as shown in the
illustration. (There are left (L) and right (R)
marks on the spring.)
Pad fixing spring
(A)
Brake pad
(B)
Split pin
(C)
Pad spacer (red)