Shimano E6000 Series Benutzerhandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scooter Shimano E6000 Series herunter. Shimano E6000 Series 47 Seiten. Total electric power system
Auch für Shimano E6000 Series: Benutzerhandbuch (38 seiten)

Seite drucken

Drive unit setting data backup function

The data saved to the drive unit is usually backed up automatically. However, performing the following operations will cause

a message to appear asking whether or not to update the backup data.

• Reinstalling the cycle computer on a bicycle with different settings.

• Changing the drive unit settings for an E-tube project.

Connection and communication with the PC

Downloading application

You need E-tube Project to configure SHIMANO STEPS and update firmware.

Download an E-tube Project from the support website (http://e-tubeproject.shimano.com).

For information on how to install an E-tube Project, check the support website. For information on how to operate the PC,

refer to the help manual on the E-tube Project.

Connection and communication with a PC is not possible while charging.

• You need SM-PCE1 and SM-JC40 / JC41 to connect SHIMANO STEPS to a PC.

• Firmware is subject to change without notice.

If necessary, contact the place of purchase.

CAUTION