Shimano E6000 Series Panduan Pengguna - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Shimano E6000 Series. Shimano E6000 Series 47 halaman. Total electric power system
Juga untuk Shimano E6000 Series: Panduan Pengguna (38 halaman)

Halaman Cetak

Drive unit setting data backup function

The data saved to the drive unit is usually backed up automatically. However, performing the following operations will cause

a message to appear asking whether or not to update the backup data.

• Reinstalling the cycle computer on a bicycle with different settings.

• Changing the drive unit settings for an E-tube project.

Connection and communication with the PC

Downloading application

You need E-tube Project to configure SHIMANO STEPS and update firmware.

Download an E-tube Project from the support website (http://e-tubeproject.shimano.com).

For information on how to install an E-tube Project, check the support website. For information on how to operate the PC,

refer to the help manual on the E-tube Project.

Connection and communication with a PC is not possible while charging.

• You need SM-PCE1 and SM-JC40 / JC41 to connect SHIMANO STEPS to a PC.

• Firmware is subject to change without notice.

If necessary, contact the place of purchase.

CAUTION