Shimano E6000 Series Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scooter Shimano E6000 Series herunter. Shimano E6000 Series 38 Seiten. Total electric power system
Auch für Shimano E6000 Series: Benutzerhandbuch (47 seiten)

Seite drucken

User's manuals in other languages are

available at :

http://si.shimano.com

IMPORTANT NOTICE

• Contact the place of purchase or a bicycle dealer for

information on installation and adjustment of the

products which are not found in the user's manual. A

dealer's manual for professional and experienced bicycle

mechanics is available on our website (http://si.shimano.

com).

• Do not disassemble or alter this product.

• Use the product according to local laws and regulations.

For safety, be sure to read this user's

manual thoroughly before use, and

follow them for correct use.

Important safety information

Guidelines that require replacement, contact the place of

purchase or a bicycle dealer.

Be sure to observe the following in order to avoid burns or

other injury from fluid leakages, overheating, fire or

explosions.

To ensure safety

DANGER

Handling the battery

• Do not deform, modify, disassemble or apply solder

directly to the battery. Doing so may cause leakage,

overheating, bursting, or ignition of the battery.

• Do not leave the battery near sources of heat such as

heaters. Do not heat the battery or throw it into a fire.

Doing so may cause bursting or ignition of the battery.

• Do not subject the battery to strong shocks or throw it. If

this is not observed, overheating, bursting, or fire may occur.

• Do not place the battery into fresh water or sea water, and

do not allow the battery terminals to get wet. Doing so

may cause overheating, bursting, or ignition of the battery.

• Use the battery and charger combination specified by the

company for charging and follow the charging conditions

specified by the company. Not doing so may cause

overheating, bursting, or ignition of the battery.

WARNING

To ensure safe riding

• Do not give too much of your attention to the cycle computer

display while riding, otherwise accidents may result.

• Check that the wheels are securely installed to the bicycle

before commencing riding. If the wheels are not securely

installed, the bicycle may fall over and serious injury may result.

• If riding a power-assisted bicycle, make sure that you are

fully familiar with the starting-off characteristics of the

bicycle before riding it on roads with several vehicle lanes

and pedestrian footpaths. If the bicycle starts off

suddenly, accidents may result.

• Check that the bicycle lights illuminate before riding at night.

Using the product safely

• Always be sure to remove the battery before carrying out

any wiring and assembly work for the bicycle, otherwise

electric shocks may result.

• When installing this product, be sure to follow the instructions

given in the user's manual. Furthermore, it is recommended that

you use only genuine Shimano parts at these times. If bolts and

nuts are left loosened or the product is damaged, the bicycle

may suddenly fall over and serious injury may result.

• After reading the user's manual carefully, keep it in a

safe place for later reference.