Shimano E6000 Series Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skuter Shimano E6000 Series. Shimano E6000 Series 38 stron. Total electric power system
Również dla Shimano E6000 Series: Podręcznik użytkownika (47 strony)
Drukuj stronę
User's manuals in other languages are
available at :
http://si.shimano.com
IMPORTANT NOTICE
• Contact the place of purchase or a bicycle dealer for
information on installation and adjustment of the
products which are not found in the user's manual. A
dealer's manual for professional and experienced bicycle
mechanics is available on our website (http://si.shimano.
com).
• Do not disassemble or alter this product.
• Use the product according to local laws and regulations.
For safety, be sure to read this user's
manual thoroughly before use, and
follow them for correct use.
Important safety information
Guidelines that require replacement, contact the place of
purchase or a bicycle dealer.
Be sure to observe the following in order to avoid burns or
other injury from fluid leakages, overheating, fire or
explosions.
To ensure safety
DANGER
Handling the battery
• Do not deform, modify, disassemble or apply solder
directly to the battery. Doing so may cause leakage,
overheating, bursting, or ignition of the battery.
• Do not leave the battery near sources of heat such as
heaters. Do not heat the battery or throw it into a fire.
Doing so may cause bursting or ignition of the battery.
• Do not subject the battery to strong shocks or throw it. If
this is not observed, overheating, bursting, or fire may occur.
• Do not place the battery into fresh water or sea water, and
do not allow the battery terminals to get wet. Doing so
may cause overheating, bursting, or ignition of the battery.
• Use the battery and charger combination specified by the
company for charging and follow the charging conditions
specified by the company. Not doing so may cause
overheating, bursting, or ignition of the battery.
WARNING
To ensure safe riding
• Do not give too much of your attention to the cycle computer
display while riding, otherwise accidents may result.
• Check that the wheels are securely installed to the bicycle
before commencing riding. If the wheels are not securely
installed, the bicycle may fall over and serious injury may result.
• If riding a power-assisted bicycle, make sure that you are
fully familiar with the starting-off characteristics of the
bicycle before riding it on roads with several vehicle lanes
and pedestrian footpaths. If the bicycle starts off
suddenly, accidents may result.
• Check that the bicycle lights illuminate before riding at night.
Using the product safely
• Always be sure to remove the battery before carrying out
any wiring and assembly work for the bicycle, otherwise
electric shocks may result.
• When installing this product, be sure to follow the instructions
given in the user's manual. Furthermore, it is recommended that
you use only genuine Shimano parts at these times. If bolts and
nuts are left loosened or the product is damaged, the bicycle
may suddenly fall over and serious injury may result.
• After reading the user's manual carefully, keep it in a
safe place for later reference.
3