Digital Audio Labs livemix LM-DANTE-EXP2 Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer Hardware Digital Audio Labs livemix LM-DANTE-EXP2 herunter. Digital Audio Labs livemix LM-DANTE-EXP2 14 Seiten. Dante option card for mix-16/mix-32
DANTE CARD UPDATE
It may be necessary to update the Dante option card to keep current with networking standards and
to stay compatible with third party products.
PRIOR TO LIVEMIX FIRMWARE V4.0 UPDATE
To determine if you need to update your Dante card, go to the Livemix Version Info screen by
pressing Mix Tools, then Global Setup, then Livemix Version Info. If the Dante Version is lower
than the version available at http://www.digitalaudio.com/support, follow the instructions below to
update the firmware.
TO UPDATE THE FIRMWARE OF THE DANTE OPTION CARD (LM-DANTE-EXP2):
1. Visit
https://my.audinate.com/latest-firmware-update-manager
Firmware Update Manager.
2. Download the MIX-16/MIX-32 update file from http://www.digitalaudio.com/support.
3. Connect your computer to the MIX-16/MIX-32 with an Ethernet cable or connect to the same
switch that the MIX-16/MIX-32 is connected to.
4. Install the Dante Firmware Update Manager.
5. Run the Dante Firmware Update Manager. Press "Browse" to locate the update file previously
downloaded. DO NOT check the "Override Device Matching" box.
6. The Firmware Update Manager will search for Dante devices on the network. When the list
appears, select the checkbox for your MIX-16/MIX-32 and click the "Start" button. The update
will take a few minutes.
7. When the update is finished, turn off the power to your MIX-16/MIX-32 and restart it.
AFTER LIVEMIX FIRMWARE V4.0 UPDATE
To determine if you need to update your Dante card, find the version number in Dante Controller.
1. In Dante Controller, enter Device View from the Devices menu.
2. Select your MIX-16 or MIX-32 from the dropdown selector.
3. Navigate to the Status tab.
Future LM-DANTE-EXP and LM-DANTE-EXP2 updates will use the Dante Updater feature in the
Dante Controller.
DANTE CARD FIRMWARE UPDATE TROUBLESHOOTING
If no devices are found in step 6:
• Make sure the MIX-16/MIX-32 is plugged in and turned on
• Make sure your computer is connected to the same network as the MIX-16/MIX-32
• Make sure there are no firewall settings blocking a connection to the MIX-16/MIX-32
LIVEMIX DANTE OPTION CARD (LM-DANTE-EXP2)
to download the the latest Dante
8