Digital Audio Labs livemix LM-DANTE-EXP2 Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt komputerowy Digital Audio Labs livemix LM-DANTE-EXP2. Digital Audio Labs livemix LM-DANTE-EXP2 14 stron. Dante option card for mix-16/mix-32

Drukuj stronę

DANTE CARD UPDATE

It may be necessary to update the Dante option card to keep current with networking standards and

to stay compatible with third party products.

PRIOR TO LIVEMIX FIRMWARE V4.0 UPDATE

To determine if you need to update your Dante card, go to the Livemix Version Info screen by

pressing Mix Tools, then Global Setup, then Livemix Version Info. If the Dante Version is lower

than the version available at http://www.digitalaudio.com/support, follow the instructions below to

update the firmware.

TO UPDATE THE FIRMWARE OF THE DANTE OPTION CARD (LM-DANTE-EXP2):

1. Visit

https://my.audinate.com/latest-firmware-update-manager

Firmware Update Manager.

2. Download the MIX-16/MIX-32 update file from http://www.digitalaudio.com/support.

3. Connect your computer to the MIX-16/MIX-32 with an Ethernet cable or connect to the same

switch that the MIX-16/MIX-32 is connected to.

4. Install the Dante Firmware Update Manager.

5. Run the Dante Firmware Update Manager. Press "Browse" to locate the update file previously

downloaded. DO NOT check the "Override Device Matching" box.

6. The Firmware Update Manager will search for Dante devices on the network. When the list

appears, select the checkbox for your MIX-16/MIX-32 and click the "Start" button. The update

will take a few minutes.

7. When the update is finished, turn off the power to your MIX-16/MIX-32 and restart it.

AFTER LIVEMIX FIRMWARE V4.0 UPDATE

To determine if you need to update your Dante card, find the version number in Dante Controller.

1. In Dante Controller, enter Device View from the Devices menu.

2. Select your MIX-16 or MIX-32 from the dropdown selector.

3. Navigate to the Status tab.

Future LM-DANTE-EXP and LM-DANTE-EXP2 updates will use the Dante Updater feature in the

Dante Controller.

DANTE CARD FIRMWARE UPDATE TROUBLESHOOTING

If no devices are found in step 6:

• Make sure the MIX-16/MIX-32 is plugged in and turned on

• Make sure your computer is connected to the same network as the MIX-16/MIX-32

• Make sure there are no firewall settings blocking a connection to the MIX-16/MIX-32

LIVEMIX DANTE OPTION CARD (LM-DANTE-EXP2)

to download the the latest Dante