Digital Equipment DEC WANcontroller 622 Problem Solving - Seite 5

Blättern Sie online oder laden Sie pdf Problem Solving für Controller Digital Equipment DEC WANcontroller 622 herunter. Digital Equipment DEC WANcontroller 622 8 Seiten.

Seite drucken

Module Loopback Test

NIC

(a)

Unfasten

screws

(b)

Loopback

connector

Move the NIC

switch down.

Wait until the READY

LED stops flashing

(max. 2 min).

flash

3. If the test passes, LEDs show the RUN state.

If the test fails, LEDs show the FAULT or ATTENTION state.

1. Attach the 50-way loopback

connector to the port to be

tested.

2. Run the module loopback test:

Wait until the hot-

swap LED lights

up (approx. 2 s).

Observe the test

result

the

LED display.

flash

Move the NIC

switch up.

NOTE

If loading has been

disabled for this slot,

the READY LED will

not stop flashing. To

enable the slot, see

the

manual

DEC

Network Integration

Server

Manage-

ment.

LKG–5727–91I