Siemens SIPART PS2 Kompakt-Bedienungsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Kompakt-Bedienungsanleitung für Industrielle Ausrüstung Siemens SIPART PS2 herunter. Siemens SIPART PS2 35 Seiten. Mounting bracket kit
Auch für Siemens SIPART PS2: Installationsanweisung (4 seiten), Betriebsanleitung (28 seiten), Installationsanweisung (4 seiten), Hardware-Installationshandbuch (30 seiten), Technische Beschreibung (26 seiten), Anleitung zur Installation des Kits (9 seiten), Installationsanweisung (11 seiten)

4.2

Mounting the NCS to a rotary actuator up to 14 mm (0.55 inch)

Prerequisites

1. An EMC filter module in the positioner.

2. An NCS for rotary actuators up to 14 mm (0.55 inch) 6DR4004-.N.20.

3. Linear actuator with interface to NAMUR. This installation must be carried out individually. Only a NAMUR mounting

bracket can be used as mounting base. The following figure shows the assembly with NAMUR mounting bracket.

linear actuator without interface to NAMUR and individual mounting solution.

Description

Dimensions in mm

Mounting on a yoke with fin

Mounting on a yoke with plane surface

Mounting on a yoke with columns

①

NAMUR mounting bracket IEC 60534 - not

included in the scope of delivery

Figure 4-2

Example of the assembly on a linear actuator with a stroke up up to 14 mm (0.55 inch)

Procedure

1. Produce the mounting panel

2. Align the sensor to the center of the stroke. Observe the dimensions specified in the figure.

SIPART PS2 Non-Contacting Sensor (NCS)

A5E00097485-07, 01/2012

②

and mounting bracket

②

Assembly panel for Non Contacting Sensor (NCS) -

individual solution; not included in the scope of delivery

③

Non-contacting sensor (NCS)

④

Magnet

⑤

Mounting bracket for the magnet - individual solution;

not included in the scope of delivery

⑤

individually.