Siemens SIPART PS2 Kompakt Kullanım Talimatları - Sayfa 25

Endüstriyel Ekipmanlar Siemens SIPART PS2 için çevrimiçi göz atın veya pdf Kompakt Kullanım Talimatları indirin. Siemens SIPART PS2 35 sayfaları. Mounting bracket kit
Ayrıca Siemens SIPART PS2 için: Kurulum Talimatı (4 sayfalar), Kullanım Talimatları Kılavuzu (28 sayfalar), Kurulum Talimatı (4 sayfalar), Donanım Kurulum Kılavuzu (30 sayfalar), Teknik Açıklama (26 sayfalar), Kit Kurulum Talimatı (9 sayfalar), Kurulum Talimatı (11 sayfalar)

4.2

Mounting the NCS to a rotary actuator up to 14 mm (0.55 inch)

Prerequisites

1. An EMC filter module in the positioner.

2. An NCS for rotary actuators up to 14 mm (0.55 inch) 6DR4004-.N.20.

3. Linear actuator with interface to NAMUR. This installation must be carried out individually. Only a NAMUR mounting

bracket can be used as mounting base. The following figure shows the assembly with NAMUR mounting bracket.

linear actuator without interface to NAMUR and individual mounting solution.

Description

Dimensions in mm

Mounting on a yoke with fin

Mounting on a yoke with plane surface

Mounting on a yoke with columns

①

NAMUR mounting bracket IEC 60534 - not

included in the scope of delivery

Figure 4-2

Example of the assembly on a linear actuator with a stroke up up to 14 mm (0.55 inch)

Procedure

1. Produce the mounting panel

2. Align the sensor to the center of the stroke. Observe the dimensions specified in the figure.

SIPART PS2 Non-Contacting Sensor (NCS)

A5E00097485-07, 01/2012

②

and mounting bracket

②

Assembly panel for Non Contacting Sensor (NCS) -

individual solution; not included in the scope of delivery

③

Non-contacting sensor (NCS)

④

Magnet

⑤

Mounting bracket for the magnet - individual solution;

not included in the scope of delivery

⑤

individually.