Siemens SIWAREX WL280 Betriebsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Industrielle Ausrüstung Siemens SIWAREX WL280 herunter. Siemens SIWAREX WL280 42 Seiten. Pressure piece sets rn-s sa

Seite drucken

5.2.6

Installing the load cell with pendulum support

Death or serious bodily injury

A falling load bearing implement can lead to considerable material damage, serious injury

or death, depending on the potential risk.

NOTICE

Damaging of load cells

Incorrect or incomplete installation can result in damage to the load cells, installed parts

and the load bearing implement.

Observe the warning notices at the start of the chapter, see: Safety information/instructions

(Page 19).

Plane of the mounting surfaces

A plane of ≤ 0.2 mm is required for the mounting surfaces.

Compressive strength of the mounting surfaces

The compressive strength of the mounting surfaces has to be appropriate for the surface

pressure of the load cell mounting rings.

RN-S SA

Operating Instructions, 09/2013, A5E32962759A-01

WARNING

5.2 Mounting the pressure piece set

Installation