Samsung 5 Series Benutzerhandbuch - Seite 4

Seite drucken

Managing Channels

Memorizing Channels

When you first set up your TV using Plug & Play, the TV memorized

the channeb that were available over the air or through your cable

system and added them to the Channel List. The Antenna and

Auto program functions descnbed below let you re-run the channel

memonzation function without having to re-run the Plug & Play

procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source, Air (using an antenna) or Cable.

Select Menu >Channel > Antenna > Air or Cable. After you have

selected ttqe signal source, go on to ttqe Auto Program function.

=z Selecting ttqe signal source using ttqe Antenna function also

determines ttqe signal source the TV is tuned to. For example,

if you receive your TV signal over ttqe air, and you select Cable,

you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are

available over the air or through your cable system and adds them to

the Channel List.

To start Auto Program, follow these steps:

1. Push MENU iTri _ Channel _ Auto Program _ ENTER _

your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV

signal.

Air

If your TV is connected to an antenna choose Air, and then press

ENTER _.

The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then

press ENTER _.

Go to Step 3.

Auto

If you choose

Auto,

and then press ENTER _,

the TV will

automatically

select the correct

Antenna

source.

Go to

Step 3,

3. On the (}able Type screen, use the _/_-/A/_"

buttons to select

the type of digital and analog cable systems you have: STD, HRC,

or IRC. Most systems are STD (Standard). When done, select

Start, and then press ENTER _.

The TV will start memorizing

channels.

'_' Channel memorization can take up to 45 minutes, depending

on your cable system.

'_' Memorized channels are added to the Added Channels

list. These are the channels you will see when you use the

Channel buttons on your remote.

Clear Scrambled

Channel

This function filters out scrambled channels after Auto Program is

completed. This process may take up to 20-30 minutes.

'_'

Press the ENTER_

button to stop the Clear Scrambled

Channel.

'_' This function is only available in Cable mode.

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel

in the All Channels, Added Channels, or Favorite screen, pressing

the A / T buttons, and then pressing the ENTER _

button.

Channel List Screens icons are listed on the left side. Select an

icon using the ,L/_' buttons to view each list.

n C_ All Channels: Shows all currently availabb channels including

those you deleted from the Added Channels

list.

m _

Added Channels: Shows all Added Channels. These are the

channels that appear when you press the CH button.

m _ Favorite: Shows all favorite channels.

m _ Programmed:

Shows all channels and programs currently

scheduled using Timer Viewing.

'_'

Remote

control

buttons

active

on the Channel

List screen.

" Green (Zoom):

Enlarges

or shrinks a channel

number.

" Yellow (Select):

Move the cursor to a channel.

Press the Yellow

button to select the channel.

A ,,,z mark appears.

Repeat to select

additional

channels.

Then, open the Tools menu and apply a

function

to the channels

you selected.

, r_ (Tools):

Displays the Channel

List Tools menu. (The Tools

menus may differ depending

on the situation.)

Display

Icons

Used

in the

Channel

List

Screens

.,z

A selected ct_annel.

A Favorite ct_annel.

A reserved program.

A program currently being broadcast.

_3 The Channel List Tools Menu

The Channel List Tbols menu contains most of the functions you

can use on the All Channel, Added Channels, and Favorite List

screens. To view, select a list screen, select a channel, and then

press the TOOLS button,

Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete ct_annels from the Added Channels list, follow these steps:

1. Select one or more channels in tt_e Added Channels list using

the A/_" buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu

appears.

3. Select Delete in the Tools menu, and then press the ENTER

button.

_4_