Plasma TV
user manual
Figures and illustrations in this User Manual are provided for reference
Contact SAMSUNG WORLDWIDE
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care Centre.
User Instructions
Country
Customer Care Centre
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more
AUSTRALIA
1300 362 603
than several minutes as it can cause screen image retention. This image retention is also
known as "screen burn". To avoid such image retention, reduce the degree of brightness
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
CHINA
400-810-5858
The top side of the product may be hot after long periods of use as heat dissipates from
the panel through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
HONG KONG
(852) 3698-4698
However, children should be prevented from touching the upper part of the product.
• The product is making a "cracking" noise.
A "cracking" noise may occur when the product contracts or expands due to a change in
1800 1100 11
the surrounding environment such as temperature or humidity. This is normal and not a
3030 8282
defect of the unit.
INDIA
1800 3000 8282
• Cell Defects
1800 266 8282
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels
which require sophisticated technology to produce. However, there may be a few bright
0800-112-8888
or dark pixels on the screen. These pixels will have no impact on the performance of the
INDONESIA
product.
021-5699-7777
• Avoid operating the TV at temperatures below 41°F (5°C)
JAPAN
0120-327-527
• A still image displayed too long may cause permanent damage to the PDP Panel.
MALAYSIA
1800-88-9999
Watching the Plasma TV in 4:3 format for a long period of time may leave
traces of borders displayed on the left, right and centre of the screen
1-800-10-SAMSUNG(726-7864) for
caused by the difference of light emission on the screen. Playing a DVD or
PLDT
a game console may cause similar effects to the screen.
1-800-3-SAMSUNG(726-7864) for
Damages caused by the above effect are not covered by the Warranty.
PHILIPPINES
Digitel
• After-images on the Screen.
1-800-8-SAMSUNG(726-7864) for
Displaying still images from Video games and PC for longer than a certain period of time
may produce partial after-images.
Globe
02-5805777
To prevent this effect, reduce the "brightness" and "contrast" when displaying still images
for a long time.
SINGAPORE
1800-SAMSUNG(726-7864)
• Warranty
Warranty does not cover any damage caused by image retention.
1800-29-3232
THAILAND
Burn-in is not covered by the warranty.
02-689-3232
Securing the Installation Space
0800-329-999
TAIWAN
0266-026-066
Keep the required distances between the product and other objects (e.g. walls) to
VIETNAM
1 800 588 889
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem
with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat
hot.
Installation with a stand.
Installation with a wall-mount.
10cm
10cm
10cm
10cm
10cm
10cm
10cm
BN68-04006A-01
BN68-04006A
- 1 -
✎
Channel mode
Channel Menu
x
P (Programme): When tuning is complete, the broadcasting
stations in your area have been assigned to position
❑ Seeing Channels
numbers from P0 to P99. You can select a channel by
entering the position number in this mode.
x
Channel List
C (aerial channel mode) / S (cable channel mode): These
two modes allow you to select a channel by entering the
Select a channel in the All Channels, Added Channels,
assigned number for each aerial broadcasting station or
Favourites or Programmed screen by pressing the ▲ / ▼
cable channel.
buttons, and pressing the ENTERE button. Then you can watch
the selected channel.
Channel List Option Menu t
Set each channel using the Channel List menu options (Add/
a 5
Air
Delete, Add to Favourite/Delete from Favourite, Timer Viewing,
a 6
♥ TV #6
Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect
a 7
♥ TV #7
All, Auto Store). Option menu items may differ depending on the
a 8
Air
channel status.
a 9
Air
Set each channel using the Channel List menu options. Option
a 9
♥ TV #9
menu items may differ depending on the channel status.
a 10
Air
a 11
♥ TV #11
■ Add / Delete: Delete or add a channel to display the channels
a 12
♥ TV #12
you want.
Zoom
Select T Tools
B
C
✎
All deleted channels will be shown on the All Channels
All Channels: Shows all currently available channels.
■
menu.
■
Added Channels: Shows all added channels.
✎
A gray-Coloured channel indicates the channel has been
■
*
Favourites: Shows all Favourite channels.
deleted.
Programmed: Shows all currently reserved Programmes.
■
✎
The Add menu only appears for deleted channels.
✎
✎
Using the remote control buttons with the Channel List
Delete a channel from the Added Channels or Favourites
menu in the same manner.
x
Green (Zoom): Enlarges or shrinks a channel number.
■ Add to Favourite / Delete from Favourite t: Set
x
Yellow (Select): Selects multiple channel lists. Select desired
channels you watch frequently as Favourites.
channels and press the Yellow button to set all the selected
■ Timer Viewing: You can set a desired channel to be displayed
channels at the same time. The c mark appears to the left of
automatically at the set time; even when you are watching
the selected channels.
another channel. Set the current time first to use this function.
x
T (Tools): Displays the Channel List option menu. (The
■ Edit Channel Name: Assign your own channel name.
Options menus may differ depending on the situation.)
■ Sort: This operation allows you to change the programme
Channel Status Display icons
numbers of the stored channels. This operation may be
necessary after using the auto store.
Icons
Operations
■ Lock / Unlock: Lock a channel so that the channel cannot be
c
A channel selected.
selected and viewed.
*
A channel set as a Favourite.
✎
This function is available only when the Child Lock is set
\
A locked channel.
to On.
)
A reserved programme.
✎
The PIN input screen appears. Enter your 4-digit PIN, the
❑ Retuning Channels
default of which is "0-0-0-0". Change the PIN using the
Change PIN option.
Area
■ Select All / Deselect All: You can select or deselect all channels
in the channel list.
You can change the desired area.
■ Auto Store: Scans for a channel automatically and stores in the
TV.
Auto Store
(depending on the country)
Channel Mode
Scans for a channel automatically and stores in the TV.
Channels will be switched within the favourite or memorised
✎
Automatically allocated programme numbers may not
channel list.
correspond to actual or desired programme numbers. If a
■ Added Channels: Shows all added channels.
channel is locked, the PIN input window appears.
■ Favourite Ch.: Shows all favourite channels.
Manual Store
Fine Tune
Scans for a channel manually and stores in the TV.
If the reception is clear, you do not have to fine tune the channel, as
✎
this is done automatically during the search and store operation. If
If a channel is locked, the PIN input window appears.
the signal is weak or distorted, fine tune the channel manually.
✎
According to channel source, Manual Store may be
✎
supported.
Fine tuned channels that have been saved are marked with an
asterisk "*" on the right-hand side of the channel number in
✎
Programme, Colour System, Sound System, Channel,
the channel banner.
Search, Store: If there is abnormal sound or no sound,
✎
To reset the fine-tuning, select Reset.
reselect the sound standard required.
- 5 -
[PE450_530-ASIA-Ready]ENG.indd 1
Plug & Play
Getting Started
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
Accessories
button. Plug & Play is available only when the Input source is set to
TV.
• Remote Control & Batteries (AAA x 2)
• Cleaning Cloth
✎
• Owner's Instructions
Connecting the power cord and antenna. (refer to
• Power Cord
'Connections')
• Warranty Card / Safety Guide (Not
available in some locations)
Input Cables (Sold Separately)
Plug & Play
Select the OSD Language.
Language
HDMI
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
Plug & Play
Web Site
TV Controller (Panel Key)
Select 'Home Use' when installing this TV in your home.
www.samsung.com
www.samsung.com
Down (Front)
Function menu
Store Demo
www.samsung.com
www.samsung.com/
Media.P
hk
m
R
www.samsung.com/
Left
Right
hk_en/
P
Return
www.samsung.com
Plug & Play
Up (Rear)
Select Area.
www.samsung.com
Area
www.samsung.com
www.samsung.com
Remote control sensor
TV Controller
Turns the TV on by pressing the controller in
www.samsung.com
Power on
standby mode.
The channel search will start automatically.
Adjusts the volume by moving the controller from
Adjusting the volume
side to side when the power is on.
Selects a channel by moving the controller up and
www.samsung.com
Selecting a channel
down when the power is on.
www.samsung.com
Press the controller when the power is on, then the
function menu screen appears. If you press it again,
Using the function menu
Clock Set
the function menu screen disappears.
Set current date and time
www.samsung.com
Selects the Menu(m) by moving the controller in
Day
Month
the function menu screen. The OSD(On Screen
d
Using the Menu (m)
www.samsung.com
01
Display) of your TV's feature appears.
d
Hour
Minute
Selects the Source(
) by moving the controller in
23
Selecting the Source (
)
the function menu screen. The Source List screen
appears.
Selects the MEDIA.P by moving the controller in
L Move
Selecting the Media Play
the function menu screen. The Media Play main
screen appears.
Selects the Power Off (P) to turn the TV off by
Power Off ( P )
moving the controller in the function menu screen.
✎
The connection method for the best HD screen quality is displayed.
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the Controller to the up/down/left/
right directions, be cautious not to press the Controller unconsciously. If
you press it, you cannot select the desired function.
ENTERE
Press the
- 2 -
✎
NOTE
Picture Menu
x
After selecting Screen Fit in HDMI (1080i / 1080p) or
Component (1080i / 1080p) mode: Adjusts the Position or
Mode t
Size by using ▲, ▼, ◄, ► button.
x
Depending on the input source, the picture size options may
Select your preferred picture type.
vary.
■ Dynamic: Suitable for a bright room.
x
The available items may differ depending on the selected
■ Standard: Suitable for a normal environment.
mode.
■ Movie: Suitable for watching movies in a dark room.
x
Settings can be adjusted and stored for each external device
Cell Light / Contrast / Brightness / Sharpness /
connected to an input on the TV.
x
If you use the Screen Fit function with HDMI 720p input,
Colour / Tint (G/R)
1 line will be cut at the top, bottom, left and right as in the
Your television has several setting options for picture quality control.
overscan function.
Advanced Settings
■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate the
(available in Standard / Movie mode)
Digital Noise Filter feature to reduce any static and ghosting that
Compared to previous models, new Samsung TVs have a more
may appear on the screen.
precise picture.
✎
When the signal is weak, try other options until the best
■ Colour Space (Auto / Native): Adjusts the range of colours
picture is displayed.
available to create the image.
■ HDMI Black Level (Low / Normal): Selects the black level on the
■ White Balance: Adjust the colour temperature for a more natural
screen to adjust the screen depth.
picture.
✎
Available only in HDMI mode (RGB signals).
R-Offset / G-Offset / B-Offset: Adjust each colour's (red, green,
■ Film Mode (Off / Auto): Sets the TV to automatically sense and
blue) darkness.
process film signals from all sources and adjust the picture for
R-Gain / G-Gain / B-Gain: Adjust each colour's (red, green, blue)
optimum quality.
brightness.
✎
Available in TV mode, AV, COMPONENT (480i / 1080i) and
Reset: Resets the White Balance to its default settings.
HDMI (480i / 1080i).
■ Gamma: Adjusts the primary colour intensity.
■ Screen Burn Protection : To reduce the possibility of screen
■ Dynamic Contrast (Off / Low / Medium / High): Adjusts the
burn, this unit is equipped with screen burn prevention technology.
screen contrast.
The Time setting allows you to programme the time between
■ Black Tone (Off / Dark / Darker / Darkest): Select the black level
movement of the picture in minutes.
to adjust the screen depth.
x
Pixel Shift (Off / On) : Using this function, you can minutely
■ Flesh Tone: Emphasize pink "Flesh Tone".
move pixels on the PDP in horizontal or vertical direction to
■ Motion Lighting (Off / On): Reduce power consumption by
minimize after image on the screen.
brightness control adapted motion.
✎
Optimum condition for pixel shift
✎
Only available in Standard mode.
Picture Options
Horizontal
■ Colour Tone (Cool / Standard / Warm1 / Warm2)
Vertical
✎
Warm1 or Warm2 will be deactivated when the picture mode
Time (minute)
is Dynamic.
✎
The Pixel Shift value may differ depending on the monitor
■ Size: Your cable box/satellite receiver may have its own set of
size (inches) and mode.
screen sizes as well. However, we highly recommend you use 16:9
✎
This function is not available in the Screen Fit mode.
mode most of the time.
x
Scrolling: This function removes after-images on the screen by
16:9: Sets the picture to 16:9 wide mode.
moving all the pixels on the PDP according to a pattern. Use this
Wide Zoom: Magnifies the picture size more than 4:3.
function when there are remaining after images or symbols on the
✎
Adjusts the Position by using ▲, ▼ buttons.
screen, especially when you displayed a still image on the screen
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen
for a long time.
size.
✎
The after-image removal function has to be executed for a
4:3: Sets the picture to basic (4:3) mode.
long time (approximately 1 hour) to effectively remove after-
✎
Do not watch in 4:3 format for a long time. Traces of borders
images on the screen. If the after-image is not removed after
displayed on the left, right and centre of the screen may
performing the function, repeat the function again.
cause image retention (screen burn) which are not covered by
✎
Press any key on the remote control to cancel this feature.
the warranty.
■ Side Grey (Light / Dark): When you watch TV with the screen ratio
Screen Fit: Displays the full image without any cut-off when HDMI
set to 4:3, the screen is prevented from any damage by adjusting
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
the white balance on both extreme left and right sides.
inputted.
- 6 -
Connections
POWER
y For better picture and audio quality, connect to a digital device using an HDMI cable.
y The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.
y Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
Selecting a language
Select the desired OSD (On Screen
Display) language.
English
Indonesia
d
U Move
E Enter
VHF/UHF Antenna
Selecting a Home Use mode
• Select the Home Use mode.
Store Demo mode is for retail
environments.
or
• When pressing TV controller, the
ANT OUT
function menu screen appears.
Home Use
Select the Menu(m) and press
L Move
E Enter
it more than 5 seconds using the
Cable
controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source(
) and pressing
it more than 5 seconds.
Selecting an Area
Media Play
Press the ► / ENTERE button. Press
Using a USB Drive
the ▲ or ▼ button, then press the
ENTERE button to select the
appropriate area.
: Asia/Europe
E Enter
Auto Store
OPTICAL
Digital Audio System
Audio Device
Setting the Clock Set
Using an Optical (Digital)
Press the ◄ or ► button to select Day,
Cable
Month, Year, Hour and Minute.
Set these by pressing the ▲ / ▼ / ◄
Year
/ ► button, and press the ENTERE
Changing the Input Source
01
2012
button to go next step.
00
Source List
U Adjust
E Enter m Skip
Use to select TV or other external input sources such as DVD / Blu-
ray players / cable box / STB satellite receiver connected to the TV.
1. Press the
SOURCE
button.
Viewing the HD Connection Guide
2. Select a desired external input source.
■ TV / AV / Component / HDMI1/DVI / HDMI2
✎
You can only choose external devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
Enjoy your TV.
How to use Edit Name
button.
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the
TOOLS
button in Source List. The
following selections appear under Edit Name:
Picture Reset
Resets your current picture mode to its default settings.
■ Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
Sound Menu
Mode t
■ Standard: Selects the normal sound mode.
■ Music: Emphasizes music over voices.
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voices over other sounds.
■ Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
■ Balance: Adjusts the balance between the right and left speaker.
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■ Reset: Resets the equalizer to its default settings.
SRS TruSurround HD t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related
Transfer Function) technology.
Auto Volume
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
SPDIF Output
Item
TV/AV/Component/HDMI
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound,
0~4
4
reducing interference going to speakers and various digital devices
0~4
4
1~4 min
4 min
such as a DVD player.
■ Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output (SPDIF) format may differ
depending on the input source.
✎
By connecting to 5.1ch speakers in a Dolby Digital setup,
maximize your interactive 3D sound experience.
■ Audio Delay: Correct audio-video sync problems, when watching
TV or video, and when listening to digital audio output using an
external device such as an AV receiver (0ms ~ 250ms).
Speaker Select
■ Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed
between the main speaker and the audio receiver. In this case, set
the TV to External Speaker.
Remote Control
✎
y PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
y For HDMI/DVI cable connection, you must use the
HDMI IN 1(DVI)
port.
y Connecting through the HDMI cable may not be supported depending on the PC.
y If an HDMI to DVI cable is connected to the
HDMI IN 1(DVI)
port, the audio does not work.
y Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may
cause the TV to malfunction.
y Service: Connector for service only.
AV Device (1)
Press to directly access to channels.
Using a HDMI Cable (up to 1080p)
Power Input
HDMI OUT
Alternately select Teletext ON, Double, Mix or OFF.
Blu-ray player / DVD / cable box / set top box
Quickly select frequently used functions.
PC
Selects the on-screen menu items and changes the
Using a HDMI (to DVI) Cable
P.MODE: Selects the picture mode.
P.SIZE: Selects the picture size.
SRS.: Turns the SRS TruSurround on and off.
R
W
R
B
R G
R
W
R Y
R
W
R
B
R
W
Y
AUDIO OUT
COMPONENT OUT
AUDIO OUT
VIDEO OUT
R-AUDIO-L
R-AUDIO-L
P
R
P
B
Y
Blu-ray player
VCR
Display Modes (HDMI Input)
AV Device (3)
AV Device (2)
Optimal resolution is 1920 X 1080 @ 60Hz.
Using a Component
Using an Audio/Video
Cable (up to 1080p)
Mode
Resolution
640 x 350
IBM
720 x 400
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
640 x 480
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
MAC
832 x 624
/ Blu-ray / HD DVD / DMA: Name the device connected to the
1152 x 870
640 x 480
input jacks to make your input source selection easier.
640 x 480
✎
When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI
640 x 480
cable, you should set the TV to PC mode under Edit Name.
800 x 600
800 x 600
✎
When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI
800 x 600
to DVI cable, you should set the TV to DVI PC mode under Edit
1024 x 768
1024 x 768
Name.
1024 x 768
✎
When connecting an AV devices to the
HDMI IN 1(DVI)
port
VESA DMT
1152 x 864
1280 x 720
with HDMI to DVI cable, you should set the TV to DVI
mode
1280 x 800
under Edit Name.
1280 x 1024
Information
1280 x 1024
1366 x 768
You can see detailed information about the selected external device.
1440 x 900
1600 x 900RB
✎
Information only available for the current connected source.
1680 x 1050
1920 x 1080
- 3 -
✎
When Speaker Select is set to External Speaker, the
■ Contents: When the On Time is activated, you can turn on a
volume and
MUTE
buttons will not operate and the sound
specific channel or play back contents such as photo or audio
settings will be limited.
files.
✎
When Speaker Select is set to External Speaker.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
• TV Speaker: Off, External Speaker: On
- Antenna: Displays the current antenna source.
✎
When Speaker Select is set to TV Speaker.
- Channel: Select the desired channel.
• TV Speaker: On, External Speaker: On
✎
- Music/Photo: Select the folder containing MP3/JPEG files on
If there is no video signal, both speakers will be mute.
the USB device.
✎
The maximum displayed number of files, including sub
Selecting the Sound Mode t
folders, in one folder of USB storage device is 2000.
When you set to Dual l ll, the current sound mode is displayed on
✎
the screen.
The media may not be playing smoothly when using the
device lower than USB 2.0.
Audio Type
Dual I-II
Default
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
Mono
Mono
Automatic
or Manual to set at your convenience. If you select Manual, you
A2 Stereo
Stereo
Stereo ↔ Mono
change
can set up the day you want to activate the timer.
Dual
Dual I ↔ Dual II
Dual I
Mono
Mono
Automatic
Security
Mono ↔ Stereo
change
NICAM
Stereo
✎
The PIN input screen appears before the setup screen.
Stereo
Mono ↔ Dual I
Dual
Dual I
✎
Dual II
Enter your 4-digit PIN, the default of which is "0-0-0-0".
Change the PIN using the Change PIN option.
If the stereo signal is weak and an automatic switching occurs,
✎
x
Child Lock (Off / On): Lock channels in Channel List, to
then switch to the mono.
prevent unauthorized users, such as children, from watching
✎
Only activated in stereo sound signal.
unsuitable programme.
✎
✎
Only available when the Input source is set to TV.
Only available when the Input source is set to TV.
x
Change PIN: Change your password required to set up the TV.
Sound Reset
✎
If you forget the PIN code, press the remote control buttons
■ Reset All: Reset all sound settings to the factory defaults.
in the following sequence in Standby mode, which resets
the PIN to "0-0-0-0":
Setup Menu
Language
Set the menu language.
❑ Setting the Time
✎
Select Language and press the ENTERE button.
Time
Eco Solution
✎
The current time will appear every time you press the
INFO
■ Energy Saving (Off / Low / Medium / High / Picture Off) :
button.
This adjusts the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
■ Clock Set: Set the Day, Month, Year, Hour, Minute.
off, but the sound remains on. Press any button except volume
■ Sleep Timer t
button to turn on the screen.
Automatically shuts off the TV after a preset period of time. (30,
■ Eco Sensor (Off / On) : To enhance your power savings; the
60, 90, 120, 150 and 180 minutes).
picture settings will automatically adapt to the light in the room.
✎
To cancel the Sleep Timer, select Off.
✎
If you adjust the Cell Light, the Eco Sensor will be set to
Off.
Timer 1 / Timer 2 / Timer 3
Min Cell Light: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
Three different on / off timer settings can be made. You must set the
clock first.
✎
If Eco Sensor is On, the display brightness may change
(become slightly darker in most cases) depending on the
■ On Time / Off Time: Set the hour, minute and Activate / Inactivate.
surrounding light intensity.
(To activate the timer with the setting you have chosen, set to
Activate.)
■ No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid
unnecessary energy consumption, set how long you want the TV
■ Volume: Set the desired volume level.
to remain on if it's not receiving a signal.
✎
Disabled when the PC is in power saving mode.
■ Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
- 7 -
Displays and selects the available video
Turns the TV on and off.
sources.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the main on-screen menu.
Displays channel lists on the screen.
Views the Media Play.
MEDIA.P
HDMI
Selects the HDMI mode directly.
Displays information on the TV screen.
values seen on the menu.
Exits the menu.
Returns to the previous menu.
A
B
C
D
Use these buttons according to the
direction on screen.
P.MODE P.SIZE
SRS
Use these buttons in a specific feature.
Installing batteries (Battery size: AAA)
Horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency
Frequency
Frequency
(H / V)
(KHz)
(Hz)
(MHz)
31.469
70.086
25.175
+/-
31.469
70.087
28.322
-/+
35.000
66.667
30.240
-/-
49.726
74.551
57.284
-/-
68.681
75.062
100.000
-/-
31.469
59.940
25.175
-/-
37.861
72.809
31.500
-/-
37.500
75.000
31.500
-/-
✎
NOTE
37.879
60.317
40.000
+/+
x
48.077
72.188
50.000
+/+
Use the remote control within 23 feet from TV.
46.875
75.000
49.500
+/+
x
Bright light may affect the performance of the remote control.
48.363
60.004
65.000
-/-
Avoid using nearby special fluorescent light or neon signs.
56.476
70.069
75.000
-/-
60.023
75.029
78.750
+/+
x
The Colour and shape may vary depending on the model.
67.500
75.000
108.000
+/+
45.000
60.000
74.250
+/+
49.702
59.810
83.500
-/+
63.981
60.020
108.000
+/+
79.976
75.025
135.000
+/+
47.712
59.790
85.500
+/+
55.935
59.887
106.500
-/+
60.000
60.000
108.000
+/+
65.290
59.954
146.250
-/+
67.500
60.000
148.500
+/+
- 4 -
Auto Protection Time
■ Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour):
If the screen remains idle with a still image for a certain period of
time defined by the user, the screen saver is activated to prevent
the formation of ghost images on the screen.
General
■ Game Mode (Off/On): When connecting to a game console
such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting the game mode.
x
Precautions and limitations for game mode
-
To disconnect the game console and connect another
external device, set Game Mode to Off in the setup
menu.
-
If you display the TV menu in Game Mode, the screen
shakes slightly.
x
Game Mode is not available in TV mode.
x
After connecting the game console, set Game Mode to
On to prevent poor picture quality. Unfortunately, you may
notice reduced picture quality
■ Melody: Set so that a melody plays when the TV is turned off,
Low, Medium and High.
✎
The Melody does not play.
-
When no sound is output from the TV because the
MUTE
button has been pressed.
-
When no sound is output from the TV because the volume
has been reduced to minimum with the
VOL –
button.
-
When the TV is turned off by Sleep Timer function.
→
→
→
→
(on).
MUTE
8
2
4
POWER
Support Menu
Self Diagnosis
■ Picture Test: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■ Sound Test: Use the built-in melody sound to check for sound
problems.
■ Reset: Reset all settings to the factory defaults.
✎
The PIN input screen appears before the setup screen.
✎
Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from "www.samsung.com" to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centres, and how to download products and
software.
- 8 -
2012-02-27
3:24:27
Seite drucken