ページを印刷する

Plasma TV

user manual

Figures and illustrations in this User Manual are provided for reference

Contact SAMSUNG WORLDWIDE

only and may differ from actual product appearance. Product design and

specifications may be changed without notice.

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care Centre.

User Instructions

Country

Customer Care Centre

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more

AUSTRALIA

1300 362 603

than several minutes as it can cause screen image retention. This image retention is also

known as "screen burn". To avoid such image retention, reduce the degree of brightness

NEW ZEALAND

0800 SAMSUNG (0800 726 786)

and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

CHINA

400-810-5858

The top side of the product may be hot after long periods of use as heat dissipates from

the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

HONG KONG

(852) 3698-4698

However, children should be prevented from touching the upper part of the product.

• The product is making a "cracking" noise.

A "cracking" noise may occur when the product contracts or expands due to a change in

1800 1100 11

the surrounding environment such as temperature or humidity. This is normal and not a

3030 8282

defect of the unit.

INDIA

1800 3000 8282

• Cell Defects

1800 266 8282

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels

which require sophisticated technology to produce. However, there may be a few bright

0800-112-8888

or dark pixels on the screen. These pixels will have no impact on the performance of the

INDONESIA

product.

021-5699-7777

• Avoid operating the TV at temperatures below 41°F (5°C)

JAPAN

0120-327-527

• A still image displayed too long may cause permanent damage to the PDP Panel.

MALAYSIA

1800-88-9999

Watching the Plasma TV in 4:3 format for a long period of time may leave

traces of borders displayed on the left, right and centre of the screen

1-800-10-SAMSUNG(726-7864) for

caused by the difference of light emission on the screen. Playing a DVD or

PLDT

a game console may cause similar effects to the screen.

1-800-3-SAMSUNG(726-7864) for

Damages caused by the above effect are not covered by the Warranty.

PHILIPPINES

Digitel

• After-images on the Screen.

1-800-8-SAMSUNG(726-7864) for

Displaying still images from Video games and PC for longer than a certain period of time

may produce partial after-images.

Globe

02-5805777

To prevent this effect, reduce the "brightness" and "contrast" when displaying still images

for a long time.

SINGAPORE

1800-SAMSUNG(726-7864)

• Warranty

Warranty does not cover any damage caused by image retention.

1800-29-3232

THAILAND

Burn-in is not covered by the warranty.

02-689-3232

Securing the Installation Space

0800-329-999

TAIWAN

0266-026-066

Keep the required distances between the product and other objects (e.g. walls) to

VIETNAM

1 800 588 889

ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in

the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

If you use parts provided by another manufacturer, it may result in a problem

with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand.

Installation with a wall-mount.

10cm

BN68-04006A-01

BN68-04006A

- 1 -

✎

Channel mode

Channel Menu

P (Programme): When tuning is complete, the broadcasting

stations in your area have been assigned to position

❑ Seeing Channels

numbers from P0 to P99. You can select a channel by

entering the position number in this mode.

Channel List

C (aerial channel mode) / S (cable channel mode): These

two modes allow you to select a channel by entering the

Select a channel in the All Channels, Added Channels,

assigned number for each aerial broadcasting station or

Favourites or Programmed screen by pressing the ▲ / ▼

cable channel.

buttons, and pressing the ENTERE button. Then you can watch

the selected channel.

Channel List Option Menu t

Set each channel using the Channel List menu options (Add/

a 5

Air

Delete, Add to Favourite/Delete from Favourite, Timer Viewing,

a 6

♥ TV #6

Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect

a 7

♥ TV #7

All, Auto Store). Option menu items may differ depending on the

a 8

Air

channel status.

a 9

Air

Set each channel using the Channel List menu options. Option

a 9

♥ TV #9

menu items may differ depending on the channel status.

a 10

Air

a 11

♥ TV #11

■ Add / Delete: Delete or add a channel to display the channels

a 12

♥ TV #12

you want.

Zoom

Select T Tools

✎

All deleted channels will be shown on the All Channels

All Channels: Shows all currently available channels.

■

menu.

■

Added Channels: Shows all added channels.

✎

A gray-Coloured channel indicates the channel has been

■

Favourites: Shows all Favourite channels.

deleted.

Programmed: Shows all currently reserved Programmes.

■

✎

The Add menu only appears for deleted channels.

✎

Using the remote control buttons with the Channel List

Delete a channel from the Added Channels or Favourites

menu in the same manner.

Green (Zoom): Enlarges or shrinks a channel number.

■ Add to Favourite / Delete from Favourite t: Set

Yellow (Select): Selects multiple channel lists. Select desired

channels you watch frequently as Favourites.

channels and press the Yellow button to set all the selected

■ Timer Viewing: You can set a desired channel to be displayed

channels at the same time. The c mark appears to the left of

automatically at the set time; even when you are watching

the selected channels.

another channel. Set the current time first to use this function.

T (Tools): Displays the Channel List option menu. (The

■ Edit Channel Name: Assign your own channel name.

Options menus may differ depending on the situation.)

■ Sort: This operation allows you to change the programme

Channel Status Display icons

numbers of the stored channels. This operation may be

necessary after using the auto store.

Icons

Operations

■ Lock / Unlock: Lock a channel so that the channel cannot be

A channel selected.

selected and viewed.

A channel set as a Favourite.

✎

This function is available only when the Child Lock is set

A locked channel.

to On.

)

A reserved programme.

✎

The PIN input screen appears. Enter your 4-digit PIN, the

❑ Retuning Channels

default of which is "0-0-0-0". Change the PIN using the

Change PIN option.

Area

■ Select All / Deselect All: You can select or deselect all channels

in the channel list.

You can change the desired area.

■ Auto Store: Scans for a channel automatically and stores in the

TV.

Auto Store

(depending on the country)

Channel Mode

Scans for a channel automatically and stores in the TV.

Channels will be switched within the favourite or memorised

✎

Automatically allocated programme numbers may not

channel list.

correspond to actual or desired programme numbers. If a

■ Added Channels: Shows all added channels.

channel is locked, the PIN input window appears.

■ Favourite Ch.: Shows all favourite channels.

Manual Store

Fine Tune

Scans for a channel manually and stores in the TV.

If the reception is clear, you do not have to fine tune the channel, as

✎

this is done automatically during the search and store operation. If

If a channel is locked, the PIN input window appears.

the signal is weak or distorted, fine tune the channel manually.

✎

According to channel source, Manual Store may be

✎

supported.

Fine tuned channels that have been saved are marked with an

asterisk "*" on the right-hand side of the channel number in

✎

Programme, Colour System, Sound System, Channel,

the channel banner.

Search, Store: If there is abnormal sound or no sound,

✎

To reset the fine-tuning, select Reset.

reselect the sound standard required.

- 5 -

[PE450_530-ASIA-Ready]ENG.indd 1

Plug & Play

Getting Started

When you turn the TV on for the first time, a sequence of on-screen

prompts will assist in configuring basic settings. Press the

Accessories

button. Plug & Play is available only when the Input source is set to

TV.

• Remote Control & Batteries (AAA x 2)

• Cleaning Cloth

✎

• Owner's Instructions

Connecting the power cord and antenna. (refer to

• Power Cord

'Connections')

• Warranty Card / Safety Guide (Not

available in some locations)

Input Cables (Sold Separately)

Plug & Play

Select the OSD Language.



Language

HDMI

HDMI-DVI

Component

Composite (AV)

Coaxial (RF)

Plug & Play

Web Site

TV Controller (Panel Key)

Select 'Home Use' when installing this TV in your home.

www.samsung.com

Down (Front)

Function menu

Store Demo

www.samsung.com

www.samsung.com/

Media.P

www.samsung.com/

Left

Right

hk_en/

Return

www.samsung.com

Plug & Play

Up (Rear)

Select Area.

www.samsung.com



Area

www.samsung.com

Remote control sensor

TV Controller

Turns the TV on by pressing the controller in

www.samsung.com

Power on

standby mode.

The channel search will start automatically.

Adjusts the volume by moving the controller from

Adjusting the volume

side to side when the power is on.

Selects a channel by moving the controller up and

www.samsung.com

Selecting a channel

down when the power is on.

www.samsung.com

Press the controller when the power is on, then the

function menu screen appears. If you press it again,

Using the function menu

Clock Set

the function menu screen disappears.

Set current date and time

www.samsung.com

Selects the Menu(m) by moving the controller in

Day

Month

the function menu screen. The OSD(On Screen

Using the Menu (m)

www.samsung.com

Display) of your TV's feature appears.

Hour

Minute

Selects the Source(

) by moving the controller in

Selecting the Source (

)

the function menu screen. The Source List screen

appears.

Selects the MEDIA.P by moving the controller in

L Move

Selecting the Media Play

the function menu screen. The Media Play main

screen appears.

Selects the Power Off (P) to turn the TV off by

Power Off ( P )

moving the controller in the function menu screen.

✎

The connection method for the best HD screen quality is displayed.

Exits the menu when pressing the controller more than 1 second.

✎

When selecting the function by moving the Controller to the up/down/left/

right directions, be cautious not to press the Controller unconsciously. If

you press it, you cannot select the desired function.

ENTERE

Press the

- 2 -

✎

NOTE

Picture Menu

After selecting Screen Fit in HDMI (1080i / 1080p) or

Component (1080i / 1080p) mode: Adjusts the Position or

Mode t

Size by using ▲, ▼, ◄, ► button.

Depending on the input source, the picture size options may

Select your preferred picture type.

vary.

■ Dynamic: Suitable for a bright room.

The available items may differ depending on the selected

■ Standard: Suitable for a normal environment.

mode.

■ Movie: Suitable for watching movies in a dark room.

Settings can be adjusted and stored for each external device

Cell Light / Contrast / Brightness / Sharpness /

connected to an input on the TV.

If you use the Screen Fit function with HDMI 720p input,

Colour / Tint (G/R)

1 line will be cut at the top, bottom, left and right as in the

Your television has several setting options for picture quality control.

overscan function.

Advanced Settings

■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the

broadcast signal received by your TV is weak, you can activate the

(available in Standard / Movie mode)

Digital Noise Filter feature to reduce any static and ghosting that

Compared to previous models, new Samsung TVs have a more

may appear on the screen.

precise picture.

✎

When the signal is weak, try other options until the best

■ Colour Space (Auto / Native): Adjusts the range of colours

picture is displayed.

available to create the image.

■ HDMI Black Level (Low / Normal): Selects the black level on the

■ White Balance: Adjust the colour temperature for a more natural

screen to adjust the screen depth.

picture.

✎

Available only in HDMI mode (RGB signals).

R-Offset / G-Offset / B-Offset: Adjust each colour's (red, green,

■ Film Mode (Off / Auto): Sets the TV to automatically sense and

blue) darkness.

process film signals from all sources and adjust the picture for

R-Gain / G-Gain / B-Gain: Adjust each colour's (red, green, blue)

optimum quality.

brightness.

✎

Available in TV mode, AV, COMPONENT (480i / 1080i) and

Reset: Resets the White Balance to its default settings.

HDMI (480i / 1080i).

■ Gamma: Adjusts the primary colour intensity.

■ Screen Burn Protection : To reduce the possibility of screen

■ Dynamic Contrast (Off / Low / Medium / High): Adjusts the

burn, this unit is equipped with screen burn prevention technology.

screen contrast.

The Time setting allows you to programme the time between

■ Black Tone (Off / Dark / Darker / Darkest): Select the black level

movement of the picture in minutes.

to adjust the screen depth.

Pixel Shift (Off / On) : Using this function, you can minutely

■ Flesh Tone: Emphasize pink "Flesh Tone".

move pixels on the PDP in horizontal or vertical direction to

■ Motion Lighting (Off / On): Reduce power consumption by

minimize after image on the screen.

brightness control adapted motion.

✎

Optimum condition for pixel shift

✎

Only available in Standard mode.

Picture Options

Horizontal

■ Colour Tone (Cool / Standard / Warm1 / Warm2)

Vertical

✎

Warm1 or Warm2 will be deactivated when the picture mode

Time (minute)

is Dynamic.

✎

The Pixel Shift value may differ depending on the monitor

■ Size: Your cable box/satellite receiver may have its own set of

size (inches) and mode.

screen sizes as well. However, we highly recommend you use 16:9

✎

This function is not available in the Screen Fit mode.

mode most of the time.

Scrolling: This function removes after-images on the screen by

16:9: Sets the picture to 16:9 wide mode.

moving all the pixels on the PDP according to a pattern. Use this

Wide Zoom: Magnifies the picture size more than 4:3.

function when there are remaining after images or symbols on the

✎

Adjusts the Position by using ▲, ▼ buttons.

screen, especially when you displayed a still image on the screen

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen

for a long time.

size.

✎

The after-image removal function has to be executed for a

4:3: Sets the picture to basic (4:3) mode.

long time (approximately 1 hour) to effectively remove after-

✎

Do not watch in 4:3 format for a long time. Traces of borders

images on the screen. If the after-image is not removed after

displayed on the left, right and centre of the screen may

performing the function, repeat the function again.

cause image retention (screen burn) which are not covered by

✎

Press any key on the remote control to cancel this feature.

the warranty.

■ Side Grey (Light / Dark): When you watch TV with the screen ratio

Screen Fit: Displays the full image without any cut-off when HDMI

set to 4:3, the screen is prevented from any damage by adjusting

(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are

the white balance on both extreme left and right sides.

inputted.

- 6 -

Connections

POWER

y For better picture and audio quality, connect to a digital device using an HDMI cable.

y The picture may not display normally (if at all) or the audio may not work if an external

device that uses an older version of HDMI mode is connected to the TV. If such a problem

occurs, ask the manufacturer of the external device about the HDMI version and, if out of

date, request an upgrade.

y Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a

connection error may occur.

Selecting a language

Select the desired OSD (On Screen

Display) language.

English

Indonesia



U Move

E Enter





VHF/UHF Antenna



Selecting a Home Use mode

• Select the Home Use mode.

Store Demo mode is for retail

environments.



• When pressing TV controller, the

ANT OUT



function menu screen appears.

Home Use

Select the Menu(m) and press

L Move

E Enter

it more than 5 seconds using the



Cable

controller. The Store Demo mode



is set. Cancel the Store Demo by

selecting Source(

) and pressing

it more than 5 seconds.



Selecting an Area

Media Play

Press the ► / ENTERE button. Press

Using a USB Drive

the ▲ or ▼ button, then press the

ENTERE button to select the

appropriate area.



: Asia/Europe





E Enter



Auto Store

OPTICAL

Digital Audio System



Audio Device

Setting the Clock Set

Using an Optical (Digital)

Press the ◄ or ► button to select Day,

Cable

Month, Year, Hour and Minute.

Set these by pressing the ▲ / ▼ / ◄

Year

/ ► button, and press the ENTERE

Changing the Input Source

2012

button to go next step.

Source List

U Adjust

E Enter m Skip

Use to select TV or other external input sources such as DVD / Blu-

ray players / cable box / STB satellite receiver connected to the TV.



1. Press the

SOURCE

button.

Viewing the HD Connection Guide

2. Select a desired external input source.

■ TV / AV / Component / HDMI1/DVI / HDMI2



✎

You can only choose external devices that are connected to the

TV. In the Source List, connected inputs will be highlighted.

Enjoy your TV.

How to use Edit Name

button.

Edit Name lets you associate a device name to an input source. To

access Edit Name, press the

TOOLS

button in Source List. The

following selections appear under Edit Name:

Picture Reset

Resets your current picture mode to its default settings.

■ Reset Picture Mode: Returns all picture values in the currently

selected mode to the default settings.

Sound Menu

Mode t

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sound to allow a

better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■ Balance: Adjusts the balance between the right and left speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the level of specific bandwidth frequencies.

■ Reset: Resets the equalizer to its default settings.

SRS TruSurround HD t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head Related

Transfer Function) technology.

Auto Volume

Because each broadcasting station has its own signal conditions,

the volume may fluctuate each time channel is changed. This feature

lets you automatically adjust the volume of the desired channel by

lowering the sound output when the modulation signal is high or by

raising the sound output when the modulation signal is low.

SPDIF Output

Item

TV/AV/Component/HDMI

SPDIF (Sony Philips Digital InterFace) is used to provide digital sound,

0~4

reducing interference going to speakers and various digital devices

0~4

1~4 min

4 min

such as a DVD player.

■ Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF) format may differ

depending on the input source.

✎

By connecting to 5.1ch speakers in a Dolby Digital setup,

maximize your interactive 3D sound experience.

■ Audio Delay: Correct audio-video sync problems, when watching

TV or video, and when listening to digital audio output using an

external device such as an AV receiver (0ms ~ 250ms).

Speaker Select

■ Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed

between the main speaker and the audio receiver. In this case, set

the TV to External Speaker.

Remote Control

✎

y PC(D-Sub) and PC/DVI AUDIO IN input are not supported.

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

y For HDMI/DVI cable connection, you must use the

HDMI IN 1(DVI)

port.

y Connecting through the HDMI cable may not be supported depending on the PC.

y If an HDMI to DVI cable is connected to the

HDMI IN 1(DVI)

port, the audio does not work.

y Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may

cause the TV to malfunction.

y Service: Connector for service only.

AV Device (1)

Press to directly access to channels.

Using a HDMI Cable (up to 1080p)

Power Input

HDMI OUT

Alternately select Teletext ON, Double, Mix or OFF.

Blu-ray player / DVD / cable box / set top box

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

Using a HDMI (to DVI) Cable

P.MODE: Selects the picture mode.

P.SIZE: Selects the picture size.

SRS.: Turns the SRS TruSurround on and off.

R G

R Y

AUDIO OUT

COMPONENT OUT

AUDIO OUT

VIDEO OUT

R-AUDIO-L

Blu-ray player

VCR

Display Modes (HDMI Input)

AV Device (3)

AV Device (2)

Optimal resolution is 1920 X 1080 @ 60Hz.

Using a Component

Using an Audio/Video

Cable (up to 1080p)

Mode

Resolution

640 x 350

IBM

720 x 400

■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

640 x 480

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV

MAC

832 x 624

/ Blu-ray / HD DVD / DMA: Name the device connected to the

1152 x 870

640 x 480

input jacks to make your input source selection easier.

640 x 480

✎

When connecting a PC to the

HDMI IN 1(DVI)

port with HDMI

640 x 480

cable, you should set the TV to PC mode under Edit Name.

800 x 600

✎

When connecting a PC to the

HDMI IN 1(DVI)

port with HDMI

800 x 600

to DVI cable, you should set the TV to DVI PC mode under Edit

1024 x 768

Name.

1024 x 768

✎

When connecting an AV devices to the

HDMI IN 1(DVI)

port

VESA DMT

1152 x 864

1280 x 720

with HDMI to DVI cable, you should set the TV to DVI

mode

1280 x 800

under Edit Name.

1280 x 1024

Information

1280 x 1024

1366 x 768

You can see detailed information about the selected external device.

1440 x 900

1600 x 900RB

✎

Information only available for the current connected source.

1680 x 1050

1920 x 1080

- 3 -

✎

When Speaker Select is set to External Speaker, the

■ Contents: When the On Time is activated, you can turn on a

volume and

MUTE

buttons will not operate and the sound

specific channel or play back contents such as photo or audio

settings will be limited.

files.

✎

When Speaker Select is set to External Speaker.

- TV/USB: Select TV or USB. (Make sure that an USB device is

connected to your TV.)

• TV Speaker: Off, External Speaker: On

- Antenna: Displays the current antenna source.

✎

When Speaker Select is set to TV Speaker.

- Channel: Select the desired channel.

• TV Speaker: On, External Speaker: On

✎

- Music/Photo: Select the folder containing MP3/JPEG files on

If there is no video signal, both speakers will be mute.

the USB device.

✎

The maximum displayed number of files, including sub

Selecting the Sound Mode t

folders, in one folder of USB storage device is 2000.

When you set to Dual l ll, the current sound mode is displayed on

✎

the screen.

The media may not be playing smoothly when using the

device lower than USB 2.0.

Audio Type

Dual I-II

Default

■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun

Mono

Automatic

or Manual to set at your convenience. If you select Manual, you

A2 Stereo

Stereo

Stereo ↔ Mono

change

can set up the day you want to activate the timer.

Dual

Dual I ↔ Dual II

Dual I

Mono

Automatic

Security

Mono ↔ Stereo

change

NICAM

Stereo

✎

The PIN input screen appears before the setup screen.

Stereo

Mono ↔ Dual I

Dual

Dual I

✎

 Dual II 

Enter your 4-digit PIN, the default of which is "0-0-0-0".

Change the PIN using the Change PIN option.

If the stereo signal is weak and an automatic switching occurs,

✎

Child Lock (Off / On): Lock channels in Channel List, to

then switch to the mono.

prevent unauthorized users, such as children, from watching

✎

Only activated in stereo sound signal.

unsuitable programme.

✎

Only available when the Input source is set to TV.

Change PIN: Change your password required to set up the TV.

Sound Reset

✎

If you forget the PIN code, press the remote control buttons

■ Reset All: Reset all sound settings to the factory defaults.

in the following sequence in Standby mode, which resets

the PIN to "0-0-0-0":

Setup Menu

Language

Set the menu language.

❑ Setting the Time

✎

Select Language and press the ENTERE button.

Time

Eco Solution

✎

The current time will appear every time you press the

INFO

■ Energy Saving (Off / Low / Medium / High / Picture Off) :

button.

This adjusts the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

■ Clock Set: Set the Day, Month, Year, Hour, Minute.

off, but the sound remains on. Press any button except volume

■ Sleep Timer t

button to turn on the screen.

Automatically shuts off the TV after a preset period of time. (30,

■ Eco Sensor (Off / On) : To enhance your power savings; the

60, 90, 120, 150 and 180 minutes).

picture settings will automatically adapt to the light in the room.

✎

To cancel the Sleep Timer, select Off.

✎

If you adjust the Cell Light, the Eco Sensor will be set to

Off.

Timer 1 / Timer 2 / Timer 3

Min Cell Light: When Eco Sensor is On, the minimum screen

brightness can be adjusted manually.

Three different on / off timer settings can be made. You must set the

clock first.

✎

If Eco Sensor is On, the display brightness may change

(become slightly darker in most cases) depending on the

■ On Time / Off Time: Set the hour, minute and Activate / Inactivate.

surrounding light intensity.

(To activate the timer with the setting you have chosen, set to

Activate.)

■ No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid

unnecessary energy consumption, set how long you want the TV

■ Volume: Set the desired volume level.

to remain on if it's not receiving a signal.

✎

Disabled when the PC is in power saving mode.

■ Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

- 7 -

Displays and selects the available video

Turns the TV on and off.

sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Adjusts the volume.

Changes channels.

Displays the main on-screen menu.

Displays channel lists on the screen.

Views the Media Play.

MEDIA.P

HDMI

Selects the HDMI mode directly.

Displays information on the TV screen.

values seen on the menu.

Exits the menu.

Returns to the previous menu.

Use these buttons according to the

direction on screen.

P.MODE P.SIZE

SRS

Use these buttons in a specific feature.

Installing batteries (Battery size: AAA)

Horizontal

Vertical

Pixel Clock

Sync Polarity

Frequency

(H / V)

(KHz)

(Hz)

(MHz)

31.469

70.086

25.175

+/-

31.469

70.087

28.322

-/+

35.000

66.667

30.240

-/-

49.726

74.551

57.284

-/-

68.681

75.062

100.000

-/-

31.469

59.940

25.175

-/-

37.861

72.809

31.500

-/-

37.500

75.000

31.500

-/-

✎

NOTE

37.879

60.317

40.000

+/+

48.077

72.188

50.000

+/+

Use the remote control within 23 feet from TV.

46.875

75.000

49.500

+/+

Bright light may affect the performance of the remote control.

48.363

60.004

65.000

-/-

Avoid using nearby special fluorescent light or neon signs.

56.476

70.069

75.000

-/-

60.023

75.029

78.750

+/+

The Colour and shape may vary depending on the model.

67.500

75.000

108.000

+/+

45.000

60.000

74.250

+/+

49.702

59.810

83.500

-/+

63.981

60.020

108.000

+/+

79.976

75.025

135.000

+/+

47.712

59.790

85.500

+/+

55.935

59.887

106.500

-/+

60.000

108.000

+/+

65.290

59.954

146.250

-/+

67.500

60.000

148.500

+/+

- 4 -

Auto Protection Time

■ Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour):

If the screen remains idle with a still image for a certain period of

time defined by the user, the screen saver is activated to prevent

the formation of ghost images on the screen.

General

■ Game Mode (Off/On): When connecting to a game console

such as PlayStation™ or Xbox™, you can enjoy a more realistic

gaming experience by selecting the game mode.

Precautions and limitations for game mode

To disconnect the game console and connect another

external device, set Game Mode to Off in the setup

menu.

If you display the TV menu in Game Mode, the screen

shakes slightly.

Game Mode is not available in TV mode.

After connecting the game console, set Game Mode to

On to prevent poor picture quality. Unfortunately, you may

notice reduced picture quality

■ Melody: Set so that a melody plays when the TV is turned off,

Low, Medium and High.

✎

The Melody does not play.

When no sound is output from the TV because the

MUTE

button has been pressed.

When no sound is output from the TV because the volume

has been reduced to minimum with the

VOL –

button.

When the TV is turned off by Sleep Timer function.

→

(on).

MUTE

POWER

Support Menu

Self Diagnosis

■ Picture Test: Use to check for picture problems. If the problem

continues to occur, check the colour pattern.

■ Sound Test: Use the built-in melody sound to check for sound

problems.

■ Reset: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

firmware from "www.samsung.com" to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can find information

regarding our call centres, and how to download products and

software.

- 8 -

2012-02-27

3:24:27