Samsung 5 Series Benutzerhandbuch - Seite 34

Seite drucken

TV Remote Control Buttons Available in Anynet + Mode

Device Type

Anynet + Device

Device with built-in

Tuner

Audio Device

The Anynet + function only works when the active source on the TV remote control is set to TV.

The ∏ button works only while in the recordable state.

You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote

control.

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.

The Anynet + functions do not operate with other manufacturers' products.

The π, μ operations may differ depending on the device.

Recording

You can make a recording of a TV programme using a Samsung recorder.

. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).

. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the ENTERE

button. Recording begins.

When the recording device is not displayed select Device List and press the red

button to search devices

. Press the EXIT button to exit.

You can record the source streams by selecting Recording: (device_name).

Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the

video from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an

antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver (Home theatre)

You can listen to sound through a receiver instead of the TV speaker.

. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).

. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

. Press the EXIT button to exit.

If your receiver supports audio only, it may not appear in the device list.

The receiver will work when you have properly connected the optical in jack of the

receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

When the receiver (home theatre) is set to On, you can hear sound output from the

TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out

5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected

to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.

If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power

failure), the Speaker Select may be set to External Speaker when you turn the TV on again.

[550_Aus]BN68-01895D-02Eng.indb 32

Operating Status

After switching to the device, when the

menu of the corresponding device is

displayed on the screen.

After switching to the device, while playing

a file

After switching to the device, when you

are watching a TV programme

When Receiver is activated

English -

Available Buttons

Numeric buttons

▲/▼/◄/►/ ENTERE buttons

Colour buttons / EXIT button

π(Backward search) / μ(Forward search) /

∫(Stop) / ∂(Play) / ∑(Pause)

P > / P < button

Volume / MUTE button

View TV

Device List

Record

DVDR Menu

DVDR Operation

Receiver

Setup

U Move E Enter R Return