Samsung 5 Series Schnellstart-Handbuch - Seite 7

Seite drucken

LED TV

user manual

Still image warning

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

Avoid displaying still images (such as jpeg picture ﬁles) or still image

speciﬁcations may be changed without notice.

elements (such as TV channel logos, TV shows or movies in panorama

or 4:3 format, stock or news scroll bars, etc.) on the screen. The

Important Warranty Information Regarding

constant display of still pictures can cause ghosting or image burn-in

Television Format Viewing

(image retention) on the LED screen, which will affect image quality. To

✎

reduce the risk of this effect, please follow the recommendations below:

See the warranty card for more information on warranty terms.

Avoid displaying the same TV channel for long periods.

Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of

Always try to display any image in full screen mode. Use the TV's

the screen width to screen height) are primarily designed to display wide

Picture Options menu to select the optimal screen size.

screen format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the

Reduce brightness and contrast values to the minimum required to

screen if your model offers this feature and the images are constantly

achieve the desired picture quality. Values that exceed the minimum

moving. Displaying stationary graphics and images on screen, such as

may speed up the burn-in process.

the dark sidebars on non- expanded standard format television video

Frequently use all TV features designed to reduce image retention and

and programming, should be limited to no more than 5% of the total

screen burn-in. Refer to proper user manual section for details.

television viewing per week. Additionally, viewing other stationary images

and text such as stock market crawls, video game displays, station

logos, web sites or computer graphics and patterns, should be limited

as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LED Displays

that leave subtle, but permanent burned-in ghost images in the LED

picture. To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark bars.

On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture. Be careful in the selection

and duration of television formats you use for viewing. Uneven LED aging

as a result of format selection and use, as well as burned-in images, are

not covered by your Samsung limited warranty.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY

STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and

limitations contained herein, SAMSUNG will additionally provide Warranty

Repair Service in the United States on SAMSUNG products purchased

in Canada, and in Canada on SAMSUNG products purchased in the

United States, for the warranty period originally speciﬁed, and to the

Contact SAMSUNG WORLDWIDE

Original Purchaser only.

If you have any questions or comments relating to Samsung products, please

contact the SAMSUNG customer care center.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement and

Country

CANADA

the Original Limited Warranty Statement, a dated Bill of Sale as Proof

of Purchase must be presented to the Service Center. Transportation

Samsung Electronics

to and from the Service Center is the responsibility of the purchaser.

Canada Inc.,

Conditions covered are limited only to manufacturing defects in material

Customer Service

or workmanship, and only those encountered in normal use of the

Address

55 Standish Court

product. Exclusions include, but are not limited to, any originally speciﬁed

Mississauga

provisions for in-home or on-site services, minimum or maximum repair

Ontario L5R 4B2 Canada

times, exchanges or replacements, accessories, options, upgrades, or

consumables.

Customer Care

1-800-SAMSUNG (726-7864)

Center

For the location of a SAMSUNG Authorized Service Center, please call

toll-free:

www.samsung.com/ca

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

(English)

Web Site

– In Canada : 1-800-SAMSUNG

www.samsung.com/ca_fr

(French)

BN68-04801A-01

- 1 -

✎

To add channels to the Added Channels list, follow these steps:

If you select Everyday or Every Week, the date you select in the

Date field becomes the start date for your scheduled viewing.

1. Select one or more channels in the All Channels list using the

For Everyday, the TV will turn on every day, at the time you

buttons and the Yellow (Select) button on your remote.

selected, starting from that date. For Everyweek, the TV will turn

2. Press the

TOOLS

button on your remote. The Tools menu appears.

on every week, on the same day of the week as the start date

3. Select Add in the Tools menu, and then press the ENTERE button.

you selected, at the time you selected, from that day on. If you

✎

All deleted channels are shown on the All Channels list. You add

select Once, the TV will turn on once, on the date and time you

channels back to the Added Channels list on the All Channels list.

selected.

✎

A gray-colored channel indicates the channel has been deleted from

5. Press the ENTERE button on your remote when done.

the Added Channels list.

✎

Only Added Channels can be scheduled.

✎

The Add menu option only appears for deleted channels.

Scheduled programs and channels are displayed in the

■ Add to Favorite /Delete from Favorite t: Lets you add

Programmed List.

channels to and delete channels from your Favorites list.

✎

When you select a digital channel, press the

To add channels to the Favorites list, follow these steps:

digital program list. If you highlight a program in the list, and then

1. Select one or more channels in the All Channels list using the

press the ENTERE (Schedule) button, you set Timer Viewing for

buttons and the Yellow (Select) button on your remote.

that program directly.

■ Channel Name Edit: Analog channels only. Lets you assign a name

2. Press the

TOOLS

button on your remote. The Tools menu appears.

of up to ﬁve characters to an analog channel. For example, Hist,

3. Select Add to Favorite in the Tools menu, and then press the

Food, Golf, etc. This makes it easier to ﬁnd and select a channel.

ENTERE button.

■ Deselect All: Deselect all the selected displayed channels.

✎

To delete channels from the Favorites list, follow these steps:

You can only select Deselect All when one or more channels are

1. Select one or more channels in the Favorite Channels list using the

selected.

buttons and the Yellow (Select) button on your remote.

■ Select All: Select all the channels in the displayed channel list.

2. Press the

TOOLS

button on your remote. The Tools menu appears.

■ Auto Program: See Auto Program under Memorizing Channels.

3. Select Delete from Favorite in the Tools menu, and then press the

Programmed List (on the Channel List Screen)

ENTERE button.

■ Timer Viewing: You can schedule a channel to be displayed

The Programmed list displays the channels and programs you have

automatically at a set time, even when you are watching another

scheduled for viewing using the Time Viewing function. You can view,

channel. You must set the current time ﬁrst in the Time > Clock

modify, or delete a show you have scheduled using the functions on the

function to use Time Viewing.

Programmed List screen Tools menu.

To schedule a channel, follow these steps:

Programmed List Screen Tools Menu

1. Select a channel in the Added Channels list using the

buttons

and the Yellow (Select) button on your remote.

Channel List

Programmed

2. Press the

TOOLS

button on your remote. The Tools menu appears.

■ Change Info: Change the scheduling information for a show or

3. Select Time Viewing in the Tools menu, and then press the

channel you have scheduled.

ENTERE button. The Time Viewing screen appears.

To change the information, follow these steps:

Timer Viewing

1. Select the Programmed List icon on the left side of the Channel List

Antenna

Channel

Repeat

screen, and then press the ENTERE button.

2. On the Programmed List screen, select the show or channel entry

DTV Air

6-1

Once

you want to change, and then press the

TOOLS

Menu appears.

Date

Start Time

3. Select Change Info, and then press the ENTERE button. The

01-01-2013

12 : 01 am

Time Viewing screen appears.

L Move

U Adjust

E Enter

R Return

4. Use the

buttons to move from entry ﬁeld to entry ﬁeld and the

buttons to change the entries. Where numbers are displayed,

4. Use the

buttons to move from entry ﬁeld to entry ﬁeld and the

you can also enter numbers directly using the number keypad on

buttons to change the entries. Where numbers are displayed,

your remote.

you can also enter numbers directly using the number keypad on

Press the ENTERE button when done.

your remote.

■ Cancel Schedules: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List

screen, and then press the ENTERE button.

2. On the Programmed List screen, select the show or channel entry

you want to cancel, and then press the

TOOLS

Menu appears.

3. Select Cancel Schedules, and then press the ENTERE button.

The Cancel Schedule screen appears.

4. Select OK, and then press the ENTERE button.

- 5 -

■ Tint: Adjusts the amount of green and red in the picture. As you

The On Screen Menus

increase the amount of green, the amount of red decreases and vice

versa.

✎

When the TV is connected to a PC, you can only make changes to

Your TV has two kinds of menus, the Main menu and the various Tools

Backlight, Contrast, Brightness, and Sharpness.

menus. The Main menu gives you access to most or all of the menu

options available on your TV. The Tools menus display a selected number

Advanced Settings

of frequently used menu options that change depending on the screen

you are viewing. A Tools menu symbol (T) in the lower right side of the

Available in Standard and Movie mode only.

screen indicates that a Tools menu is available.

Compared to previous models, new Samsung TVs offer a more precise

The Main menu has seven primary categories:

picture with more precise controls.

✎

When your TV is connected to a PC, you can only make changes to

Picture

Sound

Channel

Setup

Gamma and White Balance.

Input

Application

Support

■ Dynamic Contrast: Adjusts the screen contrast.

■ Black Tone: Selects the black level to adjust the screen depth. Darker

To view the Main menu, press the

button on your remote. To view

settings make blacks look darker.

a Tools menu, press the

TOOLS

button on your remote.

✎

■ Flesh Tone: Adjusts the amount of red in skin tones.

The menu options that appear in the Main menu depend on the

Source you have selected. For example, if you have selected the

■ Color Space: Auto automatically matches the range of colors (the

HDMI source, the Channel category will not appear. To see the

variety and number of colors) available to create pictures with the

Channel category, you must first select TV in the Source List.

color range of the video source. Native provides a color range wider

than the color range of the video source.

The Menu options are presented below, arranged by Main menu

■ White Balance: Adjusts the color temperature of the picture so that

categories. A Tools button symbol (

next to an option name

white objects look white (instead of, for example, slightly pink or

indicates the option is also available in one of the Tools menus.

slightly yellow) and the overall color of the picture looks natural.

R-Offset / G-Offset / B-Offset: Adjusts how dark each color (red,

Picture Menu

green, blue) is.

R-Gain / G-Gain / B-Gain: Adjusts how bright each color (red, green,

Mode t

blue) is.

Reset: Resets the White Balance to it's default settings.

Select your preferred picture mode.

■ Gamma: Adjusts the primary color intensity.

✎

When your TV is connected to a PC, you can only select Entertain

■ Motion Lighting: When on, the TV automatically adjusts the

and Standard.

brightness of the screen in response to the brightness of the room. In

■ Dynamic: Brightens the screen. Suitable for a bright room.

bright light, the screen brightens. In dim light, the screen dims.

■ Standard: Suitable for a normal room brightness.

✎

Available in Standard mode only.

■ Movie: Darkens the screen, making it less glary. Suitable for watching

Picture Options

movies in a darkened room.

■ Entertain: Sharpens the picture. Suitable for games.

✎

When the TV is connected to a PC, you can only make changes to

✎

Only available when the TV is connected to a PC.

the Color Tone, Size, and HDMI Black Level.

■ Color Tone: Cool makes the picture bluer (cooler). Warm 1 and Warm

Samsung MagicAngle

for 19", 22" models

2 make the picture redder (warmer).

✎

Adjust screen viewing Angle to optimize screen quality according to your

Warm1 and Warm2 are deactivated when the picture mode is set

viewing position.

to Dynamic.

■ Samsung MagicAngle: When viewing the screen at an angle from

■ Size: Set the size and aspect ratio of the picture on the screen. Your

below or above by setting the appropriate mode for each position you

cable box or satellite receiver may have its own set of screen sizes

can obtain a similar picture quality as viewing the screen directly from

as well. However, we highly recommend you use the TVs 16:9 mode

the front.

most of the time.

Off: Select when viewing from the front position.

16:9: Sets the picture to the 16:9 wide screen format.

Lean Back Mode: Select when viewing from a slightly lower position.

Zoom1: Provides moderate magniﬁcation of the picture. Sides, top,

and bottom are cut off.

Standing Mode: Select when viewing from the upper position.

■ Mode: Adjust screen viewing angle.

Zoom2: Provides larger magniﬁcation of the picture. Sides, top, and

✎

bottom are cut off.

When Samsung MagicAngle is set to Lean Back Mode or

Wide Fit: Enlarges the aspect ratio of the picture so the picture ﬁts

Standing Mode, Gamma is not available.

the entire screen.

Backlight / Contrast / Brightness / Sharpness /

4:3: Sets the picture to the old, 4:3 format and puts black or gray

Color / Tint (G/R)

borders on the right and left of the picture.

✎

Do not watch your TV in the 4:3 format for a long time. Traces of

■ Backlight: Adjusts the brightness of the screen by adjusting the

borders displayed on the left, right and center of the screen may

brightness of the individual pixels.

cause image retention (screen burn) which is not covered by the

U.S.A

■ Contrast: Increases or decreases the contrast between dark and light

warranty.

areas of the picture.

Screen Fit: Displays the full image without any cut-off when your TV is

■ Brightness: Adjusts the brightness of the screen. Not as effective as

Samsung Electronics

inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

America, Inc.

Backlight.

HD signals.

✎

85 Challenger Road

■ Sharpness: Sharpens or dulls the edges of objects.

HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

Ridgeﬁeld Park, NJ 07660

■ Color: Adjusts the color saturation. The higher the Color setting, the

(1920x1080) or 720p (1280x720) resolution.

more intense the color. Low settings remove color and the picture

becomes black, white, and gray.

www.samsung.com

- 2 -

■ Information: Display the information for a show or channel you have

To set the clock, follow these steps:

scheduled. You can also change the schedule Information.

1. Select Setup >Time > Clock.

1. Select the Programmed List icon on the left side of the Channel

2. Press ENTERE and select Auto or Manual, and then press

List screen, and then press the ENTERE button.

ENTERE again.

2. On the Programmed List screen, select the show or channel entry

If you selected Auto:

you want information for, and then press the

TOOLS

button. The

Tools Menu appears.

The TV will automatically download the correct time from a digital

3. Select Information, and then press the ENTERE button. The

channel.

Timer Viewing Info screen appears.

Select Time Zone, and then press the ENTERE button. Use

4. Select Change Info and press the ENTERE button to change

the

ENTERE.

information, or select Close and press the ENTERE button to

close the Information screen.

Select DST (Daylight Savings Time), and then press ENTERE.

button to view the

■ Select All / Deselect All: You can select or deselect all channels in

Select On if you want to turn the DST adjustment on and off

manually. Select Off to turn off the DST adjustment. Select Auto if

the channel list.

you want the TV to adjust to DST automatically. Press ENTERE

Other Channel Menu Functions

when done.

✎

DST and Time Zone function are only available when the Clock

Channel Mode

Mode is set to Auto.

<CH>

Lets you select the channel list displayed when you press the

If you selected Manual:

(Channel) button on your remote. For example, if you select Favorite

The Clock Set screen appears. Use the

Channels, you will only see Favorite channels when you press the

values in each ﬁeld or use the number buttons to enter the values

<CH>

button.

directly. Use the

with all the ﬁelds, press ENTERE.

Fine Tune

✎

Available only when Clock Mode is set to Manual.

■ Sleep Timer t

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel, as

Automatically shuts off the TV after a preset period of time. (30, 60,

this is done automatically during the search and store operation. If the

90, 120, 150 and 180 minutes).

✎

signal is weak or distorted, ﬁne tune the channel manually.

To cancel the Sleep Timer, select Off.

✎

Select the channel, and then select Fine Tune.

✎

Timer 1 / Timer 2 / Timer 3

Fine tuned channels that have been saved are marked with an

asterisk "*" on the right-hand side of the channel number in the

Turns the TV on and off automatically at times and days you select. You

channel banner.

can set three different on/off timer settings.

✎

To reset fine-tuning, select the channel, select Fine Tune, and then

You must set the clock first.

select Reset on the Fine Tune screen.

■ On Time / Off Time: Set the hour, minute, am/pm, and Activate/

Inactivate ﬁelds for On Time and Off Time. Use the

Setup Menu

move from ﬁeld to ﬁeld. Use the

in each ﬁeld. To activate the timer with the setting you have chosen,

set the Activate/Inactivate ﬁeld to Activate.

Plug & Play

■ Volume: Set the desired loudness.

button. The Tools

■ Contents: To select what will be turned on when the timer setting is

Lets you re-run the Plug & Play initial setup procedure.

activated. You can set the TV to turn on a speciﬁc channel or play

Language

back contents such as photo or audio ﬁles. Use the

move to the Contents ﬁeld, and then press the ENTERE button.

Set the menu language.

The Contents screen appears. Use the

✎

Choose between English, Español, and Français.

ﬁeld to ﬁeld. Use the

- TV/USB: Select TV or USB. The USB device must be connected

Setting the Time

to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

Time

- Channel: If you have selected TV, select the desired channel.

✎

The time you set will appear when you press the

INFO

button.

- Music/Photo: If you have selected USB, follow these steps to

■ Clock: Set the clock so you can use the various timer features of

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on the

the TV.

USB device:

✎

If you disconnect the power cord, you have to set the clock again.

The maximum number of files the TV can display, including sub

button. The Tools

folders, in one folder of a USB storage device is 2000.

✎

The media may not play smoothly if you use a USB device rated

lower than USB 2.0.

1. Use the

ﬁeld under Photo, and then press the ENTERE button. The TV

displays a single folder (the Root folder) and the type or name of the

device.

- 6 -

✎

You can adjust and store settings for each external device you have

connected to an input on the TV. Picture Sizes available by Input

Source are listed below:

Input Source

ATV, AV, Component (480i, 480p)

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

■ Digital Clean View: If the broadcast signal received by your TV is

weak, you can activate the Digital Clean View feature to reduce any

static and ghosting that may appear on the screen.

✎

When the signal is weak, try all the Digital Clean View options until

the TV displays the best picture.

■ MPEG Noise Filter: Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level: For HDMI signals, select the black level to adjust

the screen depth. Low make blacks look darker.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode: Sets the TV to automatically sense and process ﬁlm

signals from all sources and adjusts the picture for optimum quality.

✎

Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ LED Clear Motion: Removes drag from fast scenes with a lot of

movement to provide a clear picture.

Picture Reset

Resets the picture settings to their factory defaults.

Sound Menu

Mode t

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■ Balance L/R: Adjusts the balance between the right and left speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the loudness of speciﬁc bandwidth frequencies.

■ Reset: Resets the equalizer to its default settings.

DTS TruSurround

Available in Standard sound mode only.

DTS TruSurround is a patented DTS technology that solves the problem

of playing 5.1 multichannel content through two speakers. TruSurround

delivers a compelling, virtual surround sound experience through any

two-speaker playback system, including internal television speakers. It is

fully compatible with all multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for

example, simultaneous translations of a program into foreign languages).

2. Press the ENTERE button. A list of folders on the device appears.

✎

If there are no folders on your device, press the Yellow (Select)

button to select the Root folder, and then press the

button. The Timer screen re-appears.

3. Use the

buttons to highlight a folder that contains music or

photos, and then press the Yellow (Select) button to select the folder.

4. Press the

RETURN

button. The Timer screen re-appears.

■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or

Manual. If you select Manual, you can select the days you want to

buttons to select your Time Zone, and then press

activate the timer by using the

buttons to highlight the day, and

then pressing the ENTERE button. To unselect a day, highlight it,

and then press the ENTERE button.

When you are ﬁnished making all your selections on the Timer screen,

press either the ENTERE or

RETURN

button.

Other Features

Game Mode

When you connect a game console such as a PlayStation™ or Xbox™

to your TV, you can enjoy a more realistic gaming experience by turning

buttons to change the

on the Game Mode function.

✎

buttons to move from ﬁeld to ﬁeld. When done

Precautions and limitations for game mode:

Before you disconnect the game console and connect another

external device, set Game Mode to Off in the setup menu.

If you display the TV menu in Game Mode, the screen shakes

slightly.

Game Mode is not available when the input source is set to TV.

After connecting the game console, set Game Mode to On. You

may notice slightly reduced picture quality.

Program Rating Lock

The Program Rating Lock feature lets you block programs you've

determined are inappropriate for your children based on the program's

ratings. To access the Program Rating Lock feature and make any

changes, you must enter a PIN (personal identiﬁcation number). To

buttons to

watch a blocked program, you must also enter the same PIN.

buttons to change the values

✎

Program Rating Lock is not available in HDMI or Component

mode.

✎

The default PIN number of a new TV set is "0-0-0-0". You can set

your own PIN using the Change PIN function.

How It Works

buttons to

When you access the Program Rating Lock Menu functions for the

ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen

buttons to move from

closes and the Program Rating Lock Menu appears. Every time you

buttons to change the values in each ﬁeld.

access the Program Rating Lock functions, the PIN screen will appear

and you must enter a PIN.

When the Program Rating Lock screen appears, select Program

Rating Lock, and then press ENTERE. Select On, and then press the

ENTERE key again. Depending on what type of programs or movies

you want to block, select one of the options on the screen, and then

press the ENTERE button. The options are listed below:

■ TV Parental Guidelines: You can block TV programs based on their

ratings. This function allows you to control what your children are

watching.

■ MPAA Rating: You can block movies based on their MPAA ratings.

The Motion Picture Association of America (MPAA) has implemented

a rating system that provides parents or guardians with advanced

buttons to move to the ﬁeld under Music or the

information on which ﬁlms are appropriate for children.

✎

You can only select a language from among the ones being

defaults.

Channel Menu

broadcast.

Multi-Track Sound

Memorizing Channels

Picture Size

Analog channels only.

16:9, Zoom1,

■ Mono: Select for channels that are broadcasting in mono or if you are

If you are not using a cable box or satellite box, when you ﬁrst set up

Zoom2, 4:3

having difﬁculty receiving a stereo signal.

your TV using Plug & Play, the TV memorized the channels that were

■ Stereo: Select for channels that are broadcasting in stereo.

available over the air or through your cable system and added them to

16:9, Wide Fit, 4:3,

the Channel List. The Antenna and Auto program functions described

■ SAP: Select to listen to the Separate Audio Program, which is usually

Screen Fit

below let you re-run the channel memorization function without having to

a foreign-language translation.

✎

re-run the Plug & Play procedure.

Depending on the program being broadcast, you can listen to

Antenna (Switch to Cable / Switch to Air t)

Mono, Stereo or SAP.

Auto Volume

Before your television can memorize the available channels, you must

select your TV's signal source, Air (using an antenna) or Cable. Select

Because each station has its own broadcasting conditions, the

Menu > Channel > Antenna > Air or Cable. After you have selected the

volume may ﬂuctuate each time you change the channel. This feature

signal source, go on to the Auto Program function.

automatically adjusts the volume of a channel by lowering the sound

✎

Selecting the signal source using the Antenna function also

output when the modulation signal is high or by raising the sound output

determines the signal source the TV is tuned to. For example, if you

when the modulation signal is low.

receive your TV signal over the air, and you select Cable, you will

SPDIF Output

see only snow. You must select Air to see a picture.

for 32" and above models

Auto Program

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the back

The Auto Program function memorizes all channels that are available

of the TV to a digital audio in jack on a receiver or home theater.

over the air or through your cable system and adds them to the Channel

■ Audio Format: You can select the Digital Audio output (SPDIF)

List.

format. The available Digital Audio output format may differ depending

✎

If your TV is connected to a cable box or satellite box, you do not

on the input source.

need to run Auto Program. You will use the tuner in the box, not the

✎

By connecting the TV to a receiver or home theater with Dolby

tuner in the TV, to select channels.

Digital and 5.1ch speakers and selecting Dolby Digital, you can

To start Auto Program, follow these steps:

maximize your interactive 3D sound experience.

1. Push MENUm

■ Audio Delay: Lets you correct timing mismatches between the audio

remote. The Antenna Source screen appears.

track and the video when you are watching the TV and listening to

2. On the Antenna Source screen, select the source of your TV signal.

digital audio output from the TV through an external device such as

an AV receiver. When you select Audio Delay, a slider appears. Use

Air

the left and right arrow buttons to adjust the slider. Press ENTERE

If your TV is connected to an antenna choose Air, and then press

when done (0ms ~ 250ms).

ENTERE. The TV will automatically start memorizing channels.

Speaker Select

Cable

If you are listening to the sound track of a broadcast or movie through an

If your TV is connected to a cable outlet, choose Cable, and then

external receiver, you may hear a sound echo caused by the difference in

press ENTERE. Go to Step 3.

decoding speed between the TV's speakers and the speakers attached

to your audio receiver. If this occurs, set the TV to External Speaker.

Auto

✎

When you set Speaker Select to External Speaker, the TV's

If you choose Auto, and then press ENTERE, the TV will

speakers are turned off. You will hear sound through the external

automatically select the correct Antenna source. Go to Step 3.

speakers only. When you set Speaker Select to TV Speaker both

3. On the Cable Type screen, use the

the TV's speakers and the external speakers are on. You will hear

type of digital and analog cable systems you have: STD, HRC, or

sound through both.

✎

IRC. Most systems are STD (Standard). When done, select Start,

When Speaker Select is set to External Speaker, the

VOLUME

and then press ENTERE. The TV will start memorizing channels.

and

MUTE

buttons will not operate and the sound settings will be

✎

Channel memorization can take up to 45 minutes, depending on

limited.

✎

your cable system.

If there is no video signal, both the TV's speakers and the external

✎

Memorized channels are added to the Added Channels list. These

speakers will be mute.

are the channels you will see when you use the Channel buttons on

Visual Impaired

your remote.

Clear Scrambled Channel

Digital channels only.

Adds verbal description to the main audio to help the visually impaired.

This function ﬁlters out scrambled channels after Auto Program is

completed. This process may take 20~30 minutes.

Sound Reset

✎

Press the ENTERE button to stop Clear Scrambled Channel.

✎

Resets all sound settings to the factory

This function is only available in Cable mode.

- 3 -

■ Canadian English: You can block TV programs based on their

Background Color: Options include Default, White, Black, Red,

Anglophone Canadian ratings.

Green, Blue, Yellow, Magenta and Cyan. You can change the

■ Canadian French: You can block TV programs based on their French

background color of the captions. The default is Black.

RETURN

Canadian ratings.

Foreground Opacity: This adjusts the opacity of text. Options include

■ Downloadable U.S. Rating: You can use parental restriction

Default, Transparent, Translucent, Solid and Flashing.

information while watching DTV channels.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent, Solid

Locking/Blocking Programs or Movies

and Flashing.

You lock or block programs and/or movies in essentially the same way

Return to Default: This option sets each Size, Font Style, Foreground

for each option. Each option displays a grid or table. All the tables have

Color, Background Color, Foreground Opacity and Background

ratings listed on the left. The TV Parental Guidelines option also has

Opacity to its default.

✎

kinds of content listed across the top: ALL: Lock all TV ratings. / FV:

Digital Caption Options are available only when you can select

Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language /

Default and Service1 ~ Service6 in Caption Mode.

✎

D: Sexually Suggestive Dialog.

The Foreground and Background cannot be set to the same color.

To lock/block movies or shows with certain ratings and/or kinds of

Melody

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

Set so that a melody plays when the TV is turned on or off.

When you click a low rating, all the ratings above it will also display locks.

✎

The Melody does not play:

You can also Allow All or Lock All. When done, press the

RETURN

button on your remote.

When no sound is output from the TV because the

■ Change PIN: The Change PIN screen will appear. Choose any 4

has been pressed.

When no sound is output from the TV because the volume has

digits for your PIN and enter them in Enter New PIN ﬁelds. Re-enter

been reduced to minimum with the

the same 4 digits in Conﬁrm New PIN ﬁelds. When the Change PIN

screen disappears, press the

button. The TV has memorized your

When the TV is turned off by Sleep Timer function.

new PIN.

✎

Eco Solution

If you forget the PIN, press the remote-control buttons in the

following sequence, which resets the pin to "0-0-0-0" :

POWER

(off)

■ Energy Saving : Lets you adjust the brightness of the TV to reduce

MUTE

POWER

(on)

power consumption. If you select Picture Off, the screen is turned off,

but the sound remains on. Press any button except the volume button

Caption

to turn on the screen.

(On-Screen Text Dialogue)

■ Eco Sensor

■ Caption: You can switch the caption function on or off. If captions are

picture settings automatically adapt to the light in the room.

✎

not available, they will not be displayed on the screen.

If you adjust the Backlight, the Eco Sensor will be set to Off.

✎

The Caption feature does not work in Component or HDMI mode.

Min. Backlight: When Eco Sensor is On, the minimum screen

■ Caption Mode: You can select the desired caption mode.

brightness can be adjusted manually.

✎

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

If Eco Sensor is On, the display brightness may change (become

Analog Caption function operates in either analog TV channel mode

slightly darker in most cases) depending on the surrounding light

intensity.

or when a signal is supplied from an external device to the TV.

■ No Signal Power Off: Sets how quickly the TV switches to standby

(Depending on the broadcasting signal, the Analog Caption function

may or may not work with digital channels.)

mode if no picture is being received.

✎

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital

Disabled when an attached PC is in power saving mode.

■ Auto Power Off: The TV will automatically turn off when no user

channels only) The Digital Captions function works with digital

channels.

operation is detected for 4 hours.

✎

Service1~6 may not be available in digital caption mode depending

Auto Protection Time

on the broadcast.

■ Digital Caption Options: (Digital channels only)

If a still image remains on the screen for an amount of time you deﬁne,

Size: Options include Default, Small, Standard and Large. The default

the screen saver is activated to prevent the formation of ghost images

is Standard.

on the screen.

Font Style: Options include Default and Styles 0 to 7. The default is

Style 0.

Support Menu

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of

the letters. The default is White.

Self Diagnosis

■ Picture Test: Use to check for picture problems. If the problem

appears in the test picture, select Yes and follow the directions on

the screen.

■ Sound Test: Use the built-in melody to check for sound problems.

If the problem occurs during the test, select Yes and follow the

directions on the screen.

■ Signal Strength: (Digital channels only) An HD channel's reception

quality is either perfect or the channels are unavailable. Adjust your

antenna to increase signal strength.

- 7 -

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've

scheduled for viewing. Add or delete Favorite channels, add or delete

channels from the Added Channels list, schedule channels or programs

for viewing. Select a channel to watch on the All Channels, Added

Channels, or Favorite screen by pressing the

buttons, and then

pressing the ENTERE button.

✎

If you use a cable box or satellite box, you cannot use the Channel

List functions.

Air

Select T

Air

Zoom

Channel List Screens icons are listed on the left side. Select an

icon using the

buttons to view each list.

■

All Channels: Shows all currently available channels including

those you deleted from the Added Channels list.

■

Added Channels: Shows all Added Channels. These are the

channels that appear when you press the

button.

■

Channel

Auto Program

ENTERE on your

Favorite: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

scheduled using Timer Viewing.

✎

Remote control buttons active on the Channel List screen.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A c mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

T (Tools): Displays the Channel List Tools menu. (The Tools

menus may differ depending on the situation.)

(Next Program): Displays next programs.

Display Icons Used in the Channel List Screens

Icons

Meaning

buttons to select the

A selected channel.

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

The Channel List Tools Menu

Channel List

The Channel List Tools menu contains most of the functions you can use

on the All Channel, Added Channels, and Favorite List screens. To

view, select a list screen, select a channel, and then press the

button.

■ Add / Delete: Delete a channel from or add a channel to the Added

Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using the

buttons and the Yellow (Select) button on your remote.

2. Press the

TOOLS

button on your remote. The Tools menu appears.

3. Select Delete in the Tools menu, and then press the ENTERE

button.

- 4 -

■ Reset: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can ﬁnd information regarding our call

centers and how to download products and software.

Media Play

MUTE

button

Enjoy photos, music and/or movie ﬁles saved on a

VOL –

button.

USB Mass Storage Class (MSC) device.

MEDIA.P

Connecting a USB Device

1. Turn on your TV.

for 5 series

: To enhance your power savings, the

2. Connect a USB device containing photo, music, and/or movie ﬁles to

the

USB

jack on the back of the TV. A pop up window appears.

3. Press the

MEDIA.P

button on your remote. The Media Play menu

appears.

Using the Media Play Menu

To open Media Play in the Menu, follow these steps:

1. Application on the left, and then press the ENTERE button.

2. Press the

button to select Media Play (USB), and then

press the ENTERE button.

3. Press the

button to select an icon (Videos, Music, Photos,

Settings), and then press the ENTERE button.

✎

Media Play might not work properly with unlicensed multimedia

files.

✎

Need-to-Know List before using Media Play (USB)

Supported file systems are FAT and NTFS.

Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV's USB

port. USB HDD is not supported.

Before connecting your device to the TV, please back up your files

to protect them from damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

A USB device that requires high power (more than 0.5A) may not

be supported.

Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to

display on the screen.

If a file is corrupted or the TV does not support the file type, the

"Not Supported File Format" message appears.

- 8 -

TOOLS