Epson 835p - PowerLite XGA LCD Projector Informationen zum Produkt - Seite 12

Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Projektor Epson 835p - PowerLite XGA LCD Projector herunter. Epson 835p - PowerLite XGA LCD Projector 21 Seiten. Release of check tool for network projectors v1.00 for windows
Auch für Epson 835p - PowerLite XGA LCD Projector: Benutzerhandbuch (42 seiten), Betriebshandbuch (36 seiten), Schnelles Einrichten (4 seiten), Betriebshandbuch (47 seiten), Produkt-Support-Bulletin (30 seiten), Ergänzendes Handbuch (1 seiten), Broschüre & Specs (4 seiten), Installationshandbuch (19 seiten), Benutzerhandbuch (1 seiten), Technischer Brief (7 seiten), Funktion Handbuch (5 seiten), Produkt-Support-Bulletin (25 seiten), Produkt-Support-Bulletin (38 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (42 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (41 seiten), Produkt-Support-Bulletin (34 seiten), Produkt-Support-Bulletin (38 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (15 seiten), Produkt-Support-Bulletin (22 seiten), Spezifikationsblatt (4 seiten)

Seite drucken
Epson 835p - PowerLite XGA LCD Projector Informationen zum Produkt
Epson PowerLite 835p
Ad Hoc mode
Access Point mode
3. If you've already set up your computer and projector for the
mode you want to use—Ad Hoc mode (also called
computer-to-computer mode) or Access Point mode (also
called infrastructure mode)—skip to "Projecting
Wirelessly" on page 13.
Otherwise, continue with the next section.

Configuring the Connection

Note: Make sure you've installed the NS Connection software.
To connect to the projector over a wireless network, your computer
must be running Windows 98, Me, 2000, or XP. Your
Macintosh must be running OS X 10.2.4 or later. See page 183
for complete system requirements for projecting wirelessly.
Access Point mode (infrastructure mode) is required to achieve
transfer speeds up to 54MB/sec on an 802.11g network. Ad Hoc
mode (computer-to-computer mode) limits network connections to
11MB/sec. This is a standard specification of 802.11g
networking.
12
Epson PowerLite 835p
-
You can use NS Connection to connect to the projector and
send images wirelessly in two modes: Ad Hoc mode or Access
Point mode.
Ad Hoc mode (computer-to-computer mode) lets you
connect just one computer to the projector at a time; it's
easy to set up, and the only equipment you need is a
computer with a wireless (802.11g or 802.11b) network
card or adapter, or a Macintosh with an AirPort
AirPort Extreme card.
Access Point mode (infrastructure mode) lets multiple
computers access the projector at the same time and easily
trade off control over the projector. To use Access Point
mode, you need a wireless (802.11g or 802.11b) access
point or an AirPort Extreme (or AirPort) base station, and
one or more computers with wireless network cards or
adapters.
Follow the instructions below for the mode you want to use.

Using Ad Hoc Mode

To use Ad Hoc (computer-to-computer) mode, adjust your
projector and wireless card or adapter settings as described in
this section.
Configuring the Projector
Switch the projector to EasyMP mode and insert the Epson
802.11g card. You see this screen:
4. To select
Config
control. You see the following screen:
10/04
, press the
button on the remote
Enter
Easy connect mode
®
or
Config
button