Cisco 7906G - Unified IP Phone VoIP Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für IP-Telefon Cisco 7906G - Unified IP Phone VoIP herunter. Cisco 7906G - Unified IP Phone VoIP 4 Seiten. Using a handset, headset, and speaker
Auch für Cisco 7906G - Unified IP Phone VoIP: Benutzerhandbuch (21 seiten), Benutzerhandbuch (25 seiten), Datenblatt (6 seiten), Kurzreferenz (2 seiten)
Seite drucken
Using a Headset
To use a headset, disconnect the handset and connect a headset to the Handset port. For information
about purchasing headsets, see
Using Wideband with your Headset
If you connect a headset to the handset port, be sure that the Wideband Handset setting is disabled.
Choose User Preferences > Audio Preferences > Wideband Handset.
If the Wideband Handset setting shows as dimmed, then this setting is not user controllable
Note
and you must contact your system administrator to change this setting.
Using AutoAnswer
When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings.
Your system administrator can configure AutoAnswer to use the speaker to answer calls. However,
you can only monitor the call using the speaker. To talk to the caller, you must pick up the handset.
Cisco Unified IP Phone 7906G and 7911G User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3
Headset Support, page
Using a Handset, Headset, and Speaker
3.