Cisco 7906G - Unified IP Phone VoIP Instruções de utilização - Página 3
Procurar online ou descarregar pdf Instruções de utilização para Telefone IP Cisco 7906G - Unified IP Phone VoIP. Cisco 7906G - Unified IP Phone VoIP 4 páginas. Using a handset, headset, and speaker
Também para Cisco 7906G - Unified IP Phone VoIP: Manual do utilizador (21 páginas), Manual do utilizador (25 páginas), Ficha de dados (6 páginas), Referência rápida (2 páginas)
Imprimir página
Using a Headset
To use a headset, disconnect the handset and connect a headset to the Handset port. For information
about purchasing headsets, see
Using Wideband with your Headset
If you connect a headset to the handset port, be sure that the Wideband Handset setting is disabled.
Choose User Preferences > Audio Preferences > Wideband Handset.
If the Wideband Handset setting shows as dimmed, then this setting is not user controllable
Note
and you must contact your system administrator to change this setting.
Using AutoAnswer
When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings.
Your system administrator can configure AutoAnswer to use the speaker to answer calls. However,
you can only monitor the call using the speaker. To talk to the caller, you must pick up the handset.
Cisco Unified IP Phone 7906G and 7911G User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3
Headset Support, page
Using a Handset, Headset, and Speaker
3.