Siemens Sitrans WM100 Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Schalter Siemens Sitrans WM100 herunter. Siemens Sitrans WM100 16 Seiten. Motion sensing switch
Auch für Siemens Sitrans WM100: Betriebsanleitung (22 seiten)

Seite drucken

1. Sitrans Wm100 Motion Sensing Switch
2. Specifications
3. Installation
4. Wm100 Connection
5. Wm100 Typical Wiring

WM100 Connection

Notes:

Dry contacts shown in de-energized (alarm or shelf) state.

WM100 is manufactured for either 115 or 230 V AC operation. Check

WM100 nameplate for applicable voltage. Correct voltage must be

supplied. Voltages lower than specified will result in an inoperative

condition. Voltages higher than specified will severely damage unit.

For 5 second time delay and minimum 12 ppm range, connect jumper

across terminals 7 and 8. Without a jumper, the default is 10 second time

delay and minimum 6 ppm range.

Page 6

terminal circuit card

SITRANS WM100 – OPERATING INSTRUCTIONS

7ML19985MW01