Siemens dishwasher Gebrauchsanweisung Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Geschirrspüler Siemens dishwasher herunter. Siemens dishwasher 31 Seiten. Dishwasher
Auch für Siemens dishwasher: Gebrauchsanweisung Handbuch (29 seiten), Betriebsanleitung (30 seiten), Betriebsanleitung (30 seiten), Betriebsanleitung (30 seiten), Betriebsanleitung (28 seiten), Betriebsanleitung (26 seiten), Gebrauchsanweisung Handbuch (28 seiten), Gebrauchsanweisung Handbuch (26 seiten), Gebrauchsanweisung Handbuch (28 seiten), Gebrauchsanweisung Handbuch (32 seiten), Gebrauchsanweisung Handbuch (28 seiten), Gebrauchsanweisung Handbuch (34 seiten), Gebrauchsanweisung Handbuch (34 seiten), Gebrauchsanweisung Handbuch (28 seiten), Gebrauchsanweisung Handbuch (34 seiten), Gebrauchsanweisung Handbuch (26 seiten), Betriebsanleitung (40 seiten), Gebrauchsanweisung Handbuch (40 seiten), Betriebsanleitung (24 seiten), Betriebsanleitung (28 seiten), Betriebsanleitung (28 seiten)

Seite drucken
Siemens dishwasher Gebrauchsanweisung Handbuch
en

Washing dishes

Reduce costs!
If only a small number of
dishes have been loaded into
the dishwasher, selecting a
programme that operates at
the next lowest temperature
will usually suffice.
Programme data
The stated programme data are based on
standard operating conditions. The values
can vary considerably according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g.
temperature, water volume, ...).
Energy and water consumption is reduced
by up to 1/4 when dishes are washed in
the upper basket only.
Water consumption values are based on a
water hardness setting of 4.
Aqua sensor *
* on applicable models
The Aqua sensor is an optical measuring
device which measures the turbidity of the
rinsing water. A light barrier can detect
dissolved food remnants in the water, e.g.
egg, fat and oats.
The Aqua sensor is used according to
the programme. When the Aqua sensor
is active, "clean" rinsing water may be
transferred into the next rinsing bath
and/or the temperature adjusted. If the
turbidity is greater, the water is drained
and is replaced with fresh water. In this
way the water consumption is reduced by
approx. 4 litres for utensils which are "less"
dirty.
18
Switching the dishwasher ON
Turn on the tap.
Set main switch
Indicators light up according to the last
programme that was selected.
This same programme will run again if
no other programme button
pressed
The numerical display
expected duration of the programme.
Close door.
The programme starts automatically.
Optical indicator during
operation *
* With some models
During the rinse programme a light point
appears on the floor below the device's
door. Only open the dishwasher door
when the light point has disappeared.
In the case of built-in dishwashers with
flush front the light point will not be visible.
End of programme
The end of the programme is indicated by
a buzzer. This function can be changed as
follows:–
Hold down Function button C
pressed and switch on main switch
, then let the buttons go.
1
Function Button C flashes, and the
digital display indicates the value
which was set at the factory
(semi-loud).
To change the setting:
Press Function button C .
Each depression of the button
increases the set value by one,
when
is reached, the display
jumps back to
Switch off the main switch
The set value is stored in the appliance.
to ON.
1
is
7
shows the
4
(off).
.
1