Cisco 8831 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für IP-Telefon Cisco 8831 herunter. Cisco 8831 6 Seiten. Hard factory reset
Auch für Cisco 8831: Eigenschaften (17 seiten), Installationshandbuch (14 seiten), Handbuch für den Einsatz (6 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (6 seiten), Benutzerhandbuch (15 seiten), Kurzreferenz-Handbuch (2 seiten), Schnellstart-Handbuch (13 seiten), Handbuch zur Fehlersuche (3 seiten)

Seite drucken
Cisco 8831 Benutzerhandbuch

PLACING A PHONE CALL

1.
Enter a phone number (10-digit phone number) you want to reach
2.
Press [Dial] or speakerphone button

ANSWERING CALLS

1.
press [Answer] softkey,or press the speakerphone button

ENDING A CALL

1.
Press [End Call] or speakerphone button

MUTING A CALL

1.
Press the Mute
Press the Mute
2.
Note: Sound Base lights turn from red to green when not muted, and the DCU mute button is no longer red
Conference
Before You Begin
Before you can add a party to the conference, you must be on an active call and not on hold.
Step 1 Press Conf.
Step 2 Enter the phone number or speed-dial number for the party you want to add.
If you have several held calls, you can press Calls to display a caller list and add a caller to the conference.
Step 3 After the new party answers, press Conf.
The conference begins.
Step 4 (Optional) Repeat these steps to add more parties, if desired.
View Conference participants
Step 1 press ConfList to view a listof current participants
Remove Conference participants
Step 1 While in a conference, press ConfList to view a list of participants.
Step 2 Highlight the participant that you want to remove and then press Remove.

Create conference with two calls on same line

Step 1 With two connected calls on the same line, select a call to make it the active call.
The second call is put on hold.
Step 2 Press Conference.
Step 3 Press Calls to view the call list and select the caller to add to the conference.
Step 4 Wait for the call to connect.
Step 5 Press Conference to add the participant to your call.
The conference begins.
Divert
Step 1 Press Divert to send an incoming call to Voice Mail.
Note: available if extension is setup to receive voice mail
to disconnect the current call
button on the Sound Base or DCU. (Off =
button again to deactivate.
On =
) (solid red LED light when muted.
Pg. 4