Cisco SPA300 Series Benutzerhandbuch - Seite 35

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für IP-Telefon Cisco SPA300 Series herunter. Cisco SPA300 Series 38 Seiten. Configure ring type
Auch für Cisco SPA300 Series: Benutzerhandbuch (12 seiten), Schnellreferenzkarte (2 seiten), Schnellreferenzkarte (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (3 seiten), Schnellstart-Handbuch (3 seiten), Gebrauchsanweisung (3 seiten), Handbuch (2 seiten), Handbuch (2 seiten), Schnelles Benutzerhandbuch (2 seiten)

Using Your Cisco SPA302D

Configuring Phone Settings

STEP 4

CAUTION

STEP 5

NOTE

STEP 1

STEP 2

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

Place the handset in the charging cradle.

Do not remove the handset from the charging cradle during the upgrade. Do not

power off the handset, charging cradle, or base station, or otherwise interrupt the

upgrade process.

The handset erases the flash memory, downloads the new software, and verifies

the upgrade data. After the upgrade, a message appears indicating the status of

the upgrade (for example, if the upgrade succeeded). Press Reset to reboot the

handset.

If the upgrade fails, press Reset to reboot the handset. Check the status lights on

the Cisco SPA232D to make sure the unit is powered on and functioning. Repeat

the upgrade. If the upgrade continues to fail, contact your phone system

administrator.

Performing a Factory Reset

Do not perform a factory reset unless advised to do so by your phone system

administrator or by technical support.

Performing a factory reset removes all of the information from your handset (for

example, contacts, speed dials, and call records) and restores it to the original

factory software state. The Cisco SPA302D remains registered to the Cisco

SPA232D after a factory reset, and must be manually deregistered.

To perform a factory reset:

From the Settings menu, choose Factory Reset.

When prompted to confirm the reset, press Confirm. The handset returns to the

main display screen after the reset.

To view information about your handset, including the software version, hardware

version, and serial number: