Ricoh Aficio CL3000e DOT Zusatzhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Zusatzhandbuch für Drucker Ricoh Aficio CL3000e DOT herunter. Ricoh Aficio CL3000e DOT 38 Seiten. Sap printing
Auch für Ricoh Aficio CL3000e DOT: Spezifikationen (2 seiten), Handbuch (12 seiten)

Seite drucken

E E E E

Enter the IP address of the printer.

Enter Printer host IP address <xxx.xxx.xxx.xxx> [re-

turn=skip]:

192.168.15.16

Note

❒ The IP address will be added to the /etc/hosts file.

❒ If the host name of the printer has already been configured, press the { { { { RE-

TURN} } } } key. Nothing will be added to the /etc/hosts file.

F F F F

Enter the host name of the printer.

Enter Printer host name : nphost

Note

❒ The host name will be added to the /etc/hosts file.

❒ If no IP address was entered in step

file.

G G G G

Configure the printer name.

Enter logical printer name [default nphost_prn]

If you want to use the default name, press the { { { { RETURN} } } } key. Enter a new

name, if you want to use a different one.

Note

❒ The host name entered in step

H H H H

Set the print option.

Enter remote printer name [default lp]:

• Press the { { { { RETURN} } } } key, and print with PCL or PostScript is enabled.

• If you want to set the device option, enter the option parameter.

Enter remote printer name [default lp]:tray=tray1

For more information about the device option, see p.19 "Specifying the De-

vice Option".

• If you enter "text", text printing is enabled.

If you enter "text", printing with PCL and PostScript is disabled.

Enter remote printer name [default lp]:text

Limitation

❒ You can enter up to 14 characters for HP-UX 11.0, 256 for Solaris 8 and Red

Hat Linux 7.0, and 51 for Red Hat Linux 6.2.

❒ When printing with the lp command, use ( _ ) instead of ( = ) and ( ; ) in-

stead of ( , ) for operating systems that cannot use ( = ) and ( , ) such as So-

laris 2.5 or later.

After the installation shell script setup is complete, and if you enter the IP ad-

dress in step

, the following message appears.

hosts file is modified

, nothing is added to the /etc/hosts

followed by "_prn" appears in "default".

Using the Installation Shell Script