Ricoh J2SS Technisches Bulletin - Seite 4
Blättern Sie online oder laden Sie pdf Technisches Bulletin für Drucker Ricoh J2SS herunter. Ricoh J2SS 17 Seiten.
Seite drucken
REVISED ON: DECEMBER 15, '95
SUBJECT: Energy Star
SP Mode
The following two modes have been newly provided (ROM : A163-5208).
Mode No.
Auto off time can be selected
15
The auto off time can also be selected by the customer.
Please refer to pages 3 and 4 of this RTB for the procedure.
The Auto off mode is prohibited in the following conditions.
* The roll feeder is operating.
* A sheet of paper is set on the feed table.
* A Jam or SC indicator in on.
* Toner end indicator is on or Used Toner bottle is full.
Instruction Sheet
An additional explanation sheet has been added to the operating instructions booklet.
Please refer to pages 3 and 4 of this RTB for the contents of this sheet. The Energy
Saver Mode described on the second page of this instruction sheet is the Auto Energy
Saver Mode originally available with this copier.
Note: 1. When you use the new main board (main board modified for Energy Star) in a
non-Energy Star machine, please replace the ROM with the ROM
(A163-9506).
2. When you replace the RAM board, please clear all memories with SP mode -1
-21 and input the factory data refering to the service manual. (Memory clear
mode section)
Technical Bulletin
Function
: Revised
*
Settings
1 ~ 120 minute (1 minute per step)
Default : 30 minutes
No. RTB-003
DATE:October 31,
'95
PAGE: 2 of 4
*
*